TROPHY /OTZ 75x125x0.8mm with 7mm hole Cold rolled steel plate (thin steel plate) thickness 0.8mm
TROPHY 75x125x0.8 (with 7mm holes) Cold rolled steel plate (thin steel plate) is a fillet with holes with a size of 75x125mm and a thickness of 0.8mm. The raw material is Baosteel first-class cold-rolled plate. 75x125x0.8 (with 7mm holes) Cold rolled steel plate is used for environment resistance testing of industrial coatings, including acid resistance, alkali resistance, salt fog resistance, aging performance.
OTZ
-
XINHEFENG 70 * 150 * 0.8 Cold rolled steel plate without flower galvanized steel plate, rounded corners with holes
$ 172.00 -
Test grade ABS plastic board 62 * 88 * 2 black and white gray, experimental special ABS plastic board
$ 141.00 -
Test Grade Spray Sand Steel Panel 70 * 150 * 2.0 Right Angle, Experimental Spray Sand Steel Panel
$ 176.00 -
Test grade ABS + PC plastic board 75 * 130 * 2 black and white gray, experimental special ABS + PC plastic board
$ 152.00 -
Cold rolled steel plate 100 * 200 * 0.5 rounded corners, experimental special Cold rolled steel plate
$ 192.00
Introduction
Twards 75x125x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It is a thin steel plate with rounded corners and holes with a size of 75x125mm and a thickness of 0.8mm, and the raw material is Baosteel first-class cold-rolled plate. 75x125x0.8 (with 7mm holes)Cold-rolled steel plateIt is used for environmental resistance testing of industrial coatings, including acid resistance, alkali resistance, salt spray resistance, and aging resistance. The surface treatment of the cold-rolled steel plate is the most important factor in the experiment.
Parameters
| Model | raw material | Thickness (mm) | Dimensions (mm) | Weight (kg) | wrap | remark |
| 75x125x0.8 (with 7mm holes) | Baosteel first-class cold-rolled plate | 0.8 | 75x125 | 24 | Each package is 400 tablets | Rounded corners with 7mm holes |
Note: The cold-rolled steel plates sold in Nanbeichao Mall are sold in whole packages, with 400 pieces per package (free shipping including tax).
Meets standards
75x125x0.8 (with 7mm holes)Cold-rolled steel plateIn line with the technical requirements of GB912 ordinary carbon steel, the surface treatment is polished according to the requirements of GB9271.
Features
1. 75x125x0.8 (with 7mm hole)Cold-rolled steel plateIt is a die stamping and forming, and the size is accurate.
2. Rounded corners are rectangular with 7mm holes and no burrs on the edges.
3. The surface of the cold-rolled steel plate is covered with anti-rust oil
OTZ 75X125x0.8 (with 7mm hole) Cold rolled steel plate (thin steel plate)Specifications
| LIST | VALUE |
|---|---|
| raw material | Baosteel first-class cold-rolled sheet |
| thickness | 0.8mm |
| size | 75x125mm |
| Weight | 24kg |
| Encasement | Encasement 400 pieces each |
| Remarks | Rounded corners with 7mm holes |
OTZ 75X125x0.8 (with 7mm hole) Cold rolled steel plate (thin steel plate) Packing list
Thin steel plate x1 (1 pack of 400 pieces)
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Preparation method and step of film
- Measuring methods of coating Thickness Gauge
- Coated steel test technology
- Effect of leveling fluid on corrosion resistance performance of Cold rolled steel plate
- Cold rolled steel plate surface defects analysis and countermeasures
- Introduction to roller painting process
- Coating leveling and sagging performance testing
- Paint and Varnish - Determination of resistance to liquid media
- Graphic Analysis Cold rolled steel plate U-shaped bending springback simulation and experiment
- Preparation and performance analysis of Pottery and porcelain film on Cold rolled steel plate