TROPHY /OTZ 70x150x0.8mm with 7mm hole Cold rolled steel plate (thin steel plate) thickness 0.8mm

Introduction

Twards 70x150x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It meets the technical requirements of GB912 ordinary carbon steel, the surface treatment meets the requirements of GB9721, and the first-class cold-rolled plate of Baosteel is used as raw material. 70x150x0.8 (with 7mm holes)Cold-rolled steel plateIt is a thin steel plate with rounded corners and punched holes with a size of 70x150mm and a thickness of 0.8mm.

Parameters

Note: The cold-rolled steel plates sold in Nanbeichao Mall are sold in whole packages, with 400 pieces per package (free shipping including tax).

Practical application of standards

70x150x0.8 (with 7mm holes)Cold-rolled steel plate (thin steel sheet)It is used in the experiment of standard GBT 1765-1979 "Preparation method of paint film for determining damp heat resistance, salt spray resistance and weather resistance (artificial acceleration)".

Applications

70x150x0.8 (with 7mm holes)Cold-rolled steel plateIt is used for environmental resistance testing of industrial coatings, including acid resistance, alkali resistance, salt spray resistance, and aging resistance. The surface treatment of cold-rolled steel plate is the most important influencing factor for the inspection results.

Features

1. 70x150x0.8 (with 7mm hole)Cold-rolled steel plateIt is a die stamping and forming, and the size is accurate.

2. Rounded corners are rectangular with 7mm holes and no burrs on the edges.

3. The surface of the cold-rolled steel plate is covered with anti-rust oil

Cold rolled steel plate x1 (1 pack of 400 pieces)

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.