Xiongfa XFSFY-60A Halogen Moisture Meter Graduation 0.01g Moisture accuracy 0.1%

Halogen Moisture Meter is a new type of rapid moisture detection instrument. Heating by ring halogen lamp, intelligent operation. It can quickly and evenly dry the sample and obtain accurate moisture determination results. The clear moisture determination information display can realize intuitive, simple and convenient instrument operation.

The moisture analyzer is equipped with a high-precision sensor and an effective secondary heat radiation device on the basis of an electronic balance to achieve fast and accurate moisture determination. The moisture percentage and other results can be obtained through the ratio of the mass and wet weight of the dried material.

The moisture analyzer pre-stores various moisture determination methods for different samples, making the test work fast and simple. Compared with mechanical products, it doubles the work efficiency and the accuracy of measurement results. It only takes a few minutes for a typical sample to complete the determination. The instrument is easy to operate, accurate in testing, and the displayed value is clearly visible, which can display moisture value, sample initial value, final value, measurement time, temperature and other data. And it has the function of connecting with computer and printer. The Moisture Meter can be widely used in all industries that need to quickly measure moisture to meet the application requirements of various industries, such as production and experiment processes in plastics, rubber, chemical, pharmaceutical, food, and other industries.

features

1. It can be used without installation and debugging;

2. No training is required, the operation is simple, and cumbersome steps are saved;

3. Short measurement time and high work efficiency;

4. Uniform heating, stable performance and accurate testing;

5. Small size and light weight;

6. Fully automatic measurement, alarm reminder after measurement, no need to monitor the measurement process;

7. It has a wide range of uses and is almost suitable for moisture determination in various industries;

8. Sensors imported from Germany make the test effect of the instrument better and more accurate;

9. The unique Wind Shield design makes the weighing system of the instrument more stable;

10. The water content and solid content of the sample can be converted at the same time;

11. The heating chamber adopts a pure stainless steel chamber cover, which is resistant to high temperature and easy to clean.

Test steps:

1. In the state of 0.00, put the sample on the weighing pan

2. Close the lid and press Start to start the heating test.

3. After the test, the screen directly displays the moisture content of the product, press Set to switch between moisture, solid content, water loss weight, and then press Start to return to the next sample test.

Host x1, power cord x1, certificate x1, manual x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.