Runjie RJ-50 Anchor TensIon Meter, pulling force range 0~500kN
The cylinder center hole of Runjie RJ-50 Bolt Tension Gauge is 60mm, and the cylinder stroke is 120mm. The RJ-50 bolt tension is used to detect various anchors, anchor cables, anchors, expansion anchors and other anchors. pull out force.
RunJie
RJ-50
Instrument Introduction
Runjietiandi RJ-50 Bolt Tension Gauge is composed of manual pump or electric pump, hollow hydraulic cylinder, digital display pressure gauge, high-pressure oil pipe with quick connector, anchorage, pull rod, conversion joint and portable case. The hydraulic cylinder is a hollow manual or electric reset type, which can be added with a graded unloading function. The numerical display part of the RJ-50 Anchor TensIon Meter is an integrated multi-function display instrument, which can directly read the anchor tension value (KN), and has automatic calculation, peak value hold, storage and query functions, especially suitable for laboratories and On-site use, simple operation, easy to learn and use.
Note: RJ-50 Bolt TensIon Meter is a single host, and anchors, tie rods and conversion joints need to be purchased separately.
Application
Runjietiandi RJ-50 Bolt TensIon Meter is an instrument and equipment used to detect the pull-out force of anchors such as anchor rods, anchor cables, steel bars, expansion bolts, etc., and can also be used for on-site pull-out force detection (test) of glass curtain walls , is the testing instrument required by each quality inspection unit.
Features
Nickel-plated piston and sleeve | ● | Meter data storage function | ● |
Surface anti-corrosion electrostatic spraying | ● | 100 pieces of data storage capacity | ● |
New sealing ring, reliable operation | ● | Meter data query and deletion | ● |
Automatic spring return, simple structure | ● | Sensors imported from Switzerland | ● |
Auto power off function | ● | 9V battery (easy to buy) | ● |
peak hold | ● | Measuring range | 0～500kN |
error | less than 1% | Display resolution | 0.01 kN |
Standards
GB 50367-2006 "Code for Design of Reinforcement of Concrete Structures"
GB 50310-2002 "Technical Code for Building Slope Engineering"
GB 50086-2011 "Technical Specifications for Geotechnical Anchorage and Shotcrete Support Engineering"
GB 50007-2011 "Code for Design of Building Foundations"
CECS 22:2005 "Technical Regulations for Rock and Soil Anchor (Cable)"
CECS 22:99 "Code for Design and Construction of Soil Anchor Bolts"
JGJ 120-2012 "Technical Regulations for Building Foundation Pit Support"
JGJ 145-2013 "Technical Regulations for Post Anchorage of Concrete Structures"
Pictures
RunJie RJ-50 Bolt Tension GaugeSpecifications
| LIST | VALUE |
|---|---|
| error | Less than 1% |
| resolution | 0.01 kN |
| Measuring range | 0~500kN |
| Cylinder center hole | 60mm |
| Cylinder stroke | 120mm |
| Weight | 29kg |
| data storage | 100 pieces of data storage |
| Power | 9V battery |
| Standards | GB 50367-2006、GB 50310-2002、GB 50086-2011、GB 50007-2011、CECS 22：2005、CECS 22:99、JGJ 120-2012、JGJ 145-2013 |
RunJie RJ-50 Bolt Tension Gauge Packing list
Host x1, manual x1, warranty card x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.