Germany Wiggens 13365-10 Heavy Duty Pneumatic Stirrer Rotation speed 20~1200rpm

Introduction

● Two models to choose from: low torque high speed (05 model), high torque low speed (10 models)

● Complete set design, customers only need to fix the mixing head on the bracket, connect the compressed air and start working

● The complete system already includes: air motor host, metal connecting rod, pipeline, metal stirring rod (including stirring paddle), air filter (including hexagon)

● Compact design and ultra-quiet operation

● Only 35~100 psi of aerodynamic force is required to work

● Adjust the speed through the air flow control valve

● The smooth operation of the working system basically does not require the maintenance cost in the later stage

● It can be started with very low air pressure, and there will be no problems such as motor overheating and burning due to overload

● The stirring paddle and propeller are made of stainless steel, which can withstand most acids and chemical reagents, and is very easy to clean.

● Speed range: 200~10000 rpm (05 type); 50~1200 rpm(Type 10)

● Air motor output : 0~1/6 hp( Air supply capacity 80 lbs)

● Standard stainless steel stirring shaft length: 30.5 cm, diameter: 9.5 mm

● Diameter of stirring paddle: 6.4 cm dia, stainless steel

Concentrate:

hp: horsepower

CFM: Flow Unit, Cubic Feet Per Minute

1 cfm=28.4 L/min

Product parameters

Pneumatic agitator 

● Model 13365-05 is a light-duty motor, which is the most satisfactory stirring choice for all flammable and explosive places, suitable for mixing all solvents, paints, coatings, light oils, insulating materials, chemicals, etc

● Model 3365-10 is a heavy-duty motor, suitable for stirring larger viscosity samples

● Complete set design, customers only need to fix the mixing head on the bracket, connect the compressed air to start working, the complete set of system has included: air motor, stirring rod, stirring plate, gas connection pipeline, fixed fixture, air filter, pressure regulator, lubricant, bracket, etc

● The smooth operation of the working system basically does not require later maintenance

● The stirring paddle and propeller are made of stainless steel, which can withstand most acids and chemical reagents, and is very easy to clean.

● Air motor output power: 0-1/3 horsepower (supply pressure 80 lbs), very low air pressure can be started, and there will be no problems such as motor overheating and burning due to overload, gas consumption: 13 cfm

● 13365-05 / 10 standard stainless steel stirring shaft length: 30.5 cm, diameter: 9.5 mm, stirring paddle diameter: 6.4 cmdia, stainless steel

● 13370-10 standard stainless steel stirring shaft length: 30.5 cm, diameter: 12.7 mm, fits 9124 mounting clamps

● Options: Stirring paddle, stirring rod, air filtration controller

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.