Runjie RJ-40 Multifunctional Strength Tester, Concrete Strength Detection for Construction Engineering
Runjie RJ-40 multifunctional strength Detector is specially used for concrete strength detection in construction projects. It is equipped with a split digital display instrument. The force measurement range of RJ-40 is 0~40kN.
RunJie
RJ-40
-
XINGHUO XH-60T Anchor Tension Gauge 600KN
$ 1129.00 -
KOSON KS-VS intelligent miniature puller, hollow self-reset, integrated digital display
$ 665.00 -
Runjie RJLB-10 automatic drawing instrument
$ 1757.00 -
TIANDIXINGHUO XH-30T Bolt Tension Gauge, hydraulic cylinder, hollow self-resetting 300kN
$ 806.00 -
KOSON KS-71G Integrated Rebar Scanner (English version) Range 1~ 185mm
$ 1016.00
Introduction
Runjietiandi RJ-40 multifunctional strength Tester is a small hydraulic force measuring device with large pulling force. It is composed of a through-hole jack, a hand pump, a triangle chassis and a digital display force measuring device. It has a multi-purpose machine. , Novel structure, small size, complete functions, etc. The oil pump of the Tester adopts manual pressure mode, which has the characteristics of small driving torque, comfortable and reasonable shaking direction, continuous and uniform loading, etc.
Features
1. Lightweight alloy main body, built-in micro-hydraulic system, strong pulling force.
2. Equipped with split-type digital display instrument, which can store 500 pieces of data
3. Setting menu, data can be recorded, queried and deleted;
4. Value 10-segment polyline correction improves the accuracy of the instrument;
5. Ultra-low power consumption design, 6 It will automatically shut down if there is no operation in one hour, and the continuous working time can exceed 200 hours;
6. Two measurement modes of intensity Mpa and force value KN.
Standards
CEC CS69: 94 "Technical Regulations for Testing Concrete Strength by Post-installation Pullout Method"
JGJ110-97 "Inspection Standard for Bonding Strength of Decorative Bricks in Construction Engineering"
JGJ126-2000 "Code for Construction and Acceptance of Decorative Bricks for Exterior Walls"
Application
RJ-40 multifunctional strength Tester is mainly used for the detection of concrete strength (C10~C80) in construction engineering. The detection of concrete strength is based on the principle of after-installation pull-out method, by measuring the force required to pull out the anchors placed in the concrete. Calculation of concrete strength; it can also detect the bonding strength of decorative bricks, mosaics, insulation boards, concrete, mortar, paint, coatings, glues, and small-sized chemical anchors, and pullout resistance Testers for threaded parts.
Pictures
RunJie RJ-40 Multifunctional strength DetectorSpecifications
| LIST | VALUE |
|---|---|
| display mode | Force value KN, strength Mpa adjustable |
| Measuring range | 0~40KN |
| Cylinder stroke | 10mm |
| Measurement Accuracy | 1% |
| Peak hold | Yes. |
| data storage | 500 articles |
| Data viewing and LCD lighting | Yes. |
| Numerical correction | 10 paragraph correction |
| Power Supply | High Capacity lithium battery |
| Automatic shutdown | Yes. |
| Standards | CEC CS69:94、JGJ110-97、JGJ126-2000 |
| Measurement mode | Strength Mpa and force value KN |
| data storage | 500 pieces of data |
RunJie RJ-40 Multifunctional strength Detector Packing list
Host x1, manual x1, warranty card x1 Host X1, digital display instrument X1, charger X1, aluminum alloy box X1, test block 95 * 45mm X3, 40 * 40mm X3, concrete drawing accessories X1, electric grooving machine X1, manual X1, certificate of conformity 1 X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.