EYESKY ES20B-CH2O Portable Formaldehyde Detector detection range 0~10ppm
EYESKY ES20B-CH2O portable Formaldehyde Detector adopts electrochemistry detection principle, the model formaldehyde concentration Measurement Instrument Measurement range is 0~10ppm, ES20B-CH2O can display Temperature Humidity data.
EYESKY-
GUOYUGRA GY/VGD-300-CO2-G Pump suction voice type Gas Detector Aluminum alloy shell, large capacity lithium battery
$ 661.00 -
HONEYEAGLE HNAG1000-H2S Fixed hydrogen sulfide Detector 0-2000PPM
$ 347.00 -
HONEYEAGLE HNAG1000-NO2 Fixed Nitrogen Dioxide Detector 0-5000PPM
$ 582.00 -
HUIRUIPU HRP-B1000-CL2 Chlorine Gas Detector 0-50ppm/0.1ppm
$ 195.00 -
GUOYUGRA GY/VGD-200-4M-G (C6H6/C7H8/C8H10/EX) On-line Gas Detector for refineries
$ 1041.00
Introduction
Visionless ES20B-CH2O portable formaldehyde Detector is a new high-end Detector created by Visionless Technology on the basis of ES20A.adoptAll-metal housing, performance and various aspects of the index relative toES20A has been greatly improved, using new original imported sensors and more32-bit low-power processor; The circuit adopts 4 layers of wiring, which is stronger against weak signals and anti-interference; Independent high-precision imported AD chip(Some manufacturers use it in order to save costs.)2-layer circuit board and AD function built into the CPU) with unsightly possession of signalsProcessing algorithm, higher accuracy and more stable measurement results;2.5-inch dot matrix display interface, intuitive and generous reading; Very good workmanshipmeter, broughtRock solidquality. It can be applied to various hazardous industrial sites; The products are widely used in metallurgy, stoneOil & Petrochemical, Municipal, Chemical,Biology, home environmental protection, school laboratories, automobile exhaustand other fields.
Features
◆ Rose Tuhao gold all-metal shell, ergonomic design, full of feel, highlighting high-end quality;
◆ Adopt independent precision AD chip, 4-layer circuit board design, stronger ability to weak signal and anti-interference;
◆ 2.5-inch dot matrix display interface, large font interface reading beautiful, menu design is scientific and reasonable;
◆ Imported high-performance sensor, high measurement accuracy, good repeatability and long service life;
◆ Built-in high-performance suction pump, stable flow rate, can be switched on and off;
◆ Temperature and humidity display, and powerful data storage function (optional);
◆ mg/m3, PPM, VOL, LEL, PPB can be selected;
◆ Embedded 32-bit ultra-low power processor, with independent signal processing algorithm, fast response speed and stability;
◆ Scientific and reasonable sound and light alarm design, symmetrical curve, timely alarm prompt when exceeding the standard is detected, to protect personal safety;
◆ Very good industrial design, the fuselage is made of high-strength aluminum profile of military quality, wear-resistant and corrosion-resistant, suitable for complex and harsh industrial environments.








EYESKY ES20B-CH2O(0~10ppm) Formaldehyde Detector Specifications
| LIST | VALUE |
|---|---|
| Detect gas | Formaldehyde CH2O |
| Sensors principle | electrochemistry |
| Sampling method | Pump suction |
| CH2O-range | 0~10ppm |
| CH2O-resolution | 0.01ppm |
| CH2O-Precision | ±3%FS |
| CH2O - Repeatability | <3% |
| Response time | T90 ≤30s |
| Alarm mode | Sound and light alarm, two-color LED alarm light, sound ≥ 75dB@25cm |
| Operation mode | Key operation (key life up to 200,000 times) |
| main material | Full metal shell, strong wear and corrosion resistance, good feel |
| Operating temperature | -30~70 ℃ (conventional gas), -20~50 ℃ (toxic gas) |
| Environmental humidity | 10~90% RH non-condensing |
| Operating Pressure | 86~106kPa |
| Power Supply | Built-in high-performance imported core lithium battery, nominal Voltage: 3.7VDC, 2500mAh |
| Charging time | ≤ 6 hours, fully charged for 12 hours |
| Operating Time | ≥ 12h (at room temperature) |
| Dimension | 135*65*35mm |
| Weight | About 0.46Kg |
| Explosion-proof sign | Exd ib ⅡC T4 Gb |
| Protection level | IP66 |
| execution standard | GB15322.1-2003,GB3836.1-2010,GB3836.2-2010,GB3836.4-2010 |
EYESKY ES20B-CH2O(0~10ppm) Formaldehyde Detector Packing list
Host x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Influence of hot pressing process and environment parameters on TVOC and formaldehyde release from particle board
- Analysis of Proportional Gas Concentration in Welding Process
- Types of Gas Sensors Used in Safety


ES20B-CH2O(0~10ppm)





