Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> VOC Detector> EYESKY> EYESKY ES10B01-VOC(0~20ppm) Stationary VOC Detector
      EYESKY ES10B01-VOC(0~20ppm) Stationary VOC Detector

      EYESKY ES10B01-VOC (0~20ppm) Fixed VOC Online Monitor

      EYESKY ES10B01-VOC (0~20ppm) fixed VOC online monitor designed with sound and light alarm, support a variety of Measurement units, ES10B01-VOC measurement concentration range of 0~20ppm, resolution 0.01ppm.

      Brand
      SKU: NB009203
      China EYESKY
      VS
      EYESKYLOGO

      EYESKY

      Information
      Genuinegoods
      • EYESKY ES10B01-VOC(0~20ppm) Stationary VOC Detector Overview

      • Specifications
      • Comments
      • FAQs
      ES10B01-VOC(0~20ppm)
      Stationary VOC Detector

      Introduction

      Visionless ES10B01-VOC (0~20ppm) fixed VOC online monitor is a new one created by Visionless Technology on the basis of ES10AGas Detector, using original imported sensors and new ones32-bit low-power processor; Dashboard display boundarysurface, the value and the progress bar are displayed at the same time, which is beautiful and generous; Circuit adoption4 layers of wiring, against weak signals and anti-dryingDisturbance is stronger; Independent high-precision imports16-bit AD chip and signal processing algorithm to measure data accuracyHigher and more stable;4~20mA, RS485, 200~1000HZ a variety of output signals can be selected, easy to accessAlarm controllers,PLC, DCS and other control systems; Explosion-proof structures are designed to be used in a variety of hazardous industriesLocation; The products are widely used in metallurgy, petroleum and petrochemical, municipal, chemical and other industries.

      Introduction of Visionless ES10B01-VOC (0~20ppm) Fixed VOC Online Monitor

      Structural diagram of visionless ES10B01-VOC (0~20ppm) fixed VOC online monitor

      Visionless ES10B01-VOC (0~20ppm) Fixed VOC Online Monitor Sound and Light Siren Instructions

      Introduction to the advantages of the sensor of ES10B01-VOC (0~20ppm) fixed VOC online monitor

      Detail diagram of the air inlet hole of the visionless ES10B01-VOC (0~20ppm) fixed VOC online monitor

      Visionless ES10B01-VOC (0~20ppm) fixed VOC online monitor signal output selection

      Visionless ES10B01-VOC (0~20ppm) fixed VOC online monitor application environment

      VS

      EYESKY ES10B01-VOC(0~20ppm) Stationary VOC Detector Specifications

      LIST VALUE
      Detect gas VOC、TVOC
      Detection principle PID photoion
      Detection method Fixed online long-term continuous detection, diffusion detection method; fixed online continuous detection, through the external air pump, to achieve pump suction flow detection method (air pump optional);
      range 0~20ppm
      resolution 0.01ppm
      Accuracy ≤ +/- 2% (Actual concentration, higher Accuracy required according to Sensors performance)
      Operation mode Infrared remote control for remote and close operation, easy to set up
      Repeatability ≤±0.5%
      Zero drift ≤ +/- 1% (F. S/year)
      Response time ≤15s(T90)
      recovery time ≤ 20 seconds
      Explosion-proof sign Exd II CT6
      Protection level IP66
      Output signal Users can according to the actual site environment requirements, up to 2000 meters (single core 1mm2 Shielding cable) current signal 4-20mA output, can be connected to alarm Controller, PLC, DCS and other Control systems (standard configuration)
      main material Shell: ADC12 aluminum alloy, strong, wear-resistant and corrosion-resistant (optional 316 stainless steel shell) Air chamber: high-strength wear-resistant and corrosion-resistant Aluminum profile, durable (optional 316 stainless steel air chamber)
      Installation method Wall-mounted pipe integrated type (pipe type external thread specification: M45X1.5mm, optional pipe transfer screw joint, can be welded)
      Operating temperature -30~60℃
      Relative Humidity ≤ 95% RH, no condensation (Humidity > 90% RH, condensation can be equipped with Filter)
      Relative Humidity 10%~95%RH
      Power Supply 24VDC (Normal Operating Voltage range 12~ 30VDC)
      power consumption 1.5W
      Working pressure ≤200Kpa
      Dimension 180*140*92mm
      Weight About 1.6Kg
      execution standard GB15322.1-2003,GB3836.1-2010,GB3836.2-2010,GB3836.4-2010

      EYESKY ES10B01-VOC(0~20ppm) Stationary VOC Detector Packing list

      Host x1, manual x1, certificate x1

      [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

      FAQ

      [Q]
      This VOC detector can be applied to GB/T23985?
      [A]
      OK
      [Q]
      How is the ES10B01-VOC fixed VOC detector installed?
      [A]
      Hello, I suggest you take a look at the operation manual for the specific operation method of installation. There is a specific introduction. Click the "Operation Manual" icon in the Encasement List column of the product page.
      [Q]
      How does this fixed VOC detector control the operation, and is it OK for remote operation?
      [A]
      Hello, the eyeless fixed VOC detectors are all operated by infrared remote devices and can be used for long-distance operation.
      EYESKY
      EYESKY ES10B01-VOC (0~20ppm) Fixed VOC Online Monitor
      Service
      Focus on online sales of Lab Testing Instruments