KEDIDA CT-6659E Industrial pH Meter
CT--6659E Industrial pH Meter is a multi-functional and smart instrument that integrates acid alkalinity measurement and control and oxidation reduction measurement and control. Its functions are complete and the performance is stable. CT-6659E Industrial pH Meter is widely used in Eletroplating plants, circuit board plants, fermentation, Food processing and other wastewater treatment occasions.
kedida
CT-6659E
-
AOLILONG PHB-10 pen pH meter laboratory test site, water quality assurance, industrial and mining production process and other ph value monitoring
$ 110.00 -
E-PHSCAN-LT-10K pH electrode
$ 105.00 -
FANGZHOU FZ-660 2-in-1 electrode for organic sample measurement
$ 195.00 -
PH value of hydrogen ion concentration measurement in aqueous solution by AOLILONG PHS-2C digital acidity meter
$ 125.00 -
PHSCAN20F-K pen pHmeter for semi-solid measurement
$ 145.00
Introduction:
CT--6659E industrial pH meter is a multi-functional and intelligent instrument integrating pH measurement and control and redox measurement and control. Its functions are complete and the performance is stable. Easy to operate and other features. It is one of the most cost-effective instruments in this category. It is widely used in electroplating plants, circuit board factories, fermentation, food processing and other sewage treatment occasions.
Features
Microchip chip in the United States, 96×96 international standard shell. High-quality components, with LED display, isolated 4-20mA current output, dual relay control, high-low point alarm indication, power-down memory, no backup battery, data storage for more than ten years.
One pH controller, one pH electrode, 3 packs/sets of pH (4.01; 6.86; 9.18) standard buffer. A copy of the instruction manual
5. Standard configuration of industrial PH meter: (unit: set)
kedida CT-6659E Industrial pH MeterSpecifications
| LIST | VALUE |
|---|---|
| Power supply | AC 220V(160—250V)50Hz |
| Power consumption of the whole machine | <5W |
| Accuracy | 0．01pH 1mV |
| PH range | 0.00~14.00pH |
| set point | 2 |
| Environmental temperature | 0~50℃ |
| Automatic temperature compensation | 0~100℃ |
| Display | Dual four-digit LED display, high and low control LED indication |
| Allowable Relative Humidity | 35~85％RH |
| Parameter save | ≥ 10 years |
| output mode | ON／OFF 4~20mA |
| output Capacity | AC 250v／3A DC30V／3A |
| Input Impedance | ≥1012Ω |
| Insulation R | ≥10MΩ |
| Dimension | 96*96*125mm |
| mV range | ±2000mV |
kedida CT-6659E Industrial pH Meter Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
