JINLONG 50μm wire rod

The Wire diameter of the JINLONG 50μm wire rod is 0.6μm.

Brand

SKU: NB000959

JinLong

Model

50μm

Get Quote

JinLong

Information

Datasheet

What else did others buy

Genuinegoods

JinLong 50μm Wire rodOverview
Specifications
Comments
FAQs

50μm

Wire rod

Schematic diagram of Jinlong Machinery 54μm wire rod coating film

Introduction

Jinlong Machinery 50μm wire rod is a 50 micron wire wound wire Bar Coater, the coating width is 30cm, and the surface contains electroplating to ensure that the coating rod is more wear-resistant and has a longer service life. The diameter of the steel wire of the 50μm wire rod is 0.6mm, and the diameter of the steel wire corresponding to different wire rod models is different, and the thickness of the coating film is also different. The wire rod can be used for coating film sample preparation in colorant, varnish, ink and other industries.

Parameters

Model	Wire diameter (mm)	Wet film thickness (μm)	Length (mm)	Diameter (mm)	remark
50μm	0.6	50	400	10	Electroplated included

Actual picture of the product

Jinlong Machinery 50μm line rod real shot 1

King Long Machinery 50μm wire rod specification and size drawing

Jinlong Machinery 50μm line rod real shot 2

Jinlong Machinery 50μm line rod real shot 3

Jinlong Machinery 50μm line rod real shot 4

Jinlong Machinery 50μm line rod real shot 5

Jinlong Machinery 50μm wire rod real shot 6

Optional

JinLong 50μm Wire rodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	50μm
diameter	10mm
Total length	400mm
Application width	300mm
grip width	50+50mm
material	stainless steel

JinLong 50μm Wire rod Packing list

Wire rod X1, Encasement tube X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

My percent solids are 45 percent, and I want to apply Dry-Film 23 microns. Can this bar do it?

[A]

Sure

[Q]

Hello, the wire rod has not been used for a while, and something similar to rust is found on the steel wire. How do you need to clean this?

[A]

Hello, this generally does not rust. It may be caused by oxidation caused by sweat on the hands at ordinary times, and no one takes care of it for a long time. Generally, there is Electroplated coating on the steel wire. When using it, you can wear cloth gloves, which cannot damage the Electroplated coating; in addition, it cannot be damp. If you find rust, you can wipe it off with water. Thank you!

+JinLong 50μm Wire rod Big data

+JinLong 50μm Wire rodKnowledge

+Navigation