JINLONG 100μm wire rod
The steel Wire diameter of JINLONG 100μm wire rod is 1.1mm.
JinLong
-
Japan OSP-120/250 inks bar WFT 120μm length 250mm
$ 152.00 -
Japan OSP-05/400 Applicator rod WFT 5μm length 400mm
$ 172.00 -
RK K303.10.3 No. 3 coater wire rod K303 coater special film thickness 24μm
$ 192.00 -
Japan OSP OSP-120T L250 Applicator rod wire-wound drawdown Bar WFT 120μm Length 250mm
$ 152.00 -
RDS 70 #1/2 "Steel Wire Drawdown Rod film thickness 160.0μm Wire diameter 1.78mm
$ 179.00
Introduction
The thickness of the 100μm wire rod coating film of Jinlong Machinery is 100 microns, the effective coating width is 300cm, and there are 5cm grip parts at each end, which is ergonomic. The 100μm wire rod is a stainless steel wire winding, the wire is firm, not easy to break, and the cost-effective domestic (CN) coated wire rod can be used in coatings, inks, plastics and other chemical industries or scientific research institutionsextensiveApply.
Parameters
| Model | Wire diameter (mm) | Wet film thickness (μm) | Length (mm) | Diameter (mm) | remark |
| 100μm | 1.1 | 100 | 400 | 10 | Electroplated included |
Actual picture of the product
JinLong 100μm Wire rodSpecifications
| LIST | VALUE |
|---|---|
| Production process | Wire-wound |
| WFT | 100μm |
| diameter | 10mm |
| Total length | 400mm |
| Application width | 300mm |
| grip width | 50+50mm |
| material | stainless steel |
JinLong 100μm Wire rod Packing list
Wire rod X1, Encasement tube X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- How to ensure consistent Film thickness?
- Wire Bar _ Spreader (Spreader Tool) Category
- What are the advantages of Spreader?
- Code of use for coating rods
- Spreader wet film thickness conversion
- Preparation method of film
- Coating construction performance testing Application instrument type summary