TQC AB3053 inks coating bar 10μm WFT Total length 440mm

The Dutch TQC inks coating bar AB3053 is a stainless steel wire-wound drawdown Bar with good acid and alkaline resistance. The AB3053 inks coating bar can be prepared with a wet film thickness of 10 μm.

Brand

SKU: NB009822

TQC sheen

Model

AB3053

Get Quote

TQC sheen shop

Information

Datasheet

What else did others buy

Genuinegoods

TQC sheen AB3053 Mayer RodOverview
Specifications
Comments
FAQs

AB3053

Mayer Rod

Introduction

The coating width of the Dutch TQC filament wound ink scraper is 320mm, and the thickness of the wet film that can be prepared is 4~200μm.

Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. TQC ink squeegee is made of stainless steel, which has good acid and alkali resistance. Ink squeegee can be used with automatic coaters.

Dutch TQC ink squeegee AB3053

Product parameters

Model	Wet film thickness	Coating width	Overall length	Straightness	Material	craft
AB3050	4μm	320 mm	440mm	< 50 μm	stainless steel	Winding
AB3051	6μm
AB3052	8μm
AB3053	10μm
AB3054	12μm
AB3055	14μm
AB3056	15μm
AB3057	20μm
AB3058	24μm
AB3059	30μm
AB3060	34μm
AB3061	42µm
AB3062	40μm
AB3063	50μm
AB3064	56μm
AB3065	60μm
AB3066	76μm
AB3067	100μm
AB3068	120μm
AB3069	200μm

Optional

TQC sheen AB3053 Mayer RodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	10μm
Total length	440mm
Application width	320mm
grip width	60+60mm
material	stainless steel

TQC sheen AB3053 Mayer Rod Packing list

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is it feasible to prepare PTFE/PP composite diaphragm with Mayer-Rod?

[A]

Yes, by diluting to a reasonable PTFE emulsion, Stir a suitable binder uniformly, a single-layer film is prepared on the PP film, and after the composite diaphragm is initially dried, it is placed in a 60 ° C constant temperature bellows for drying, and the solvent evaporates. It is worth PTFE/PP composite diaphragm.

[Q]

The solid content of the product is 48%, and the dry-film thickness after scraping should be 5 microns. Can this film applicator?

[A]

Sure

+TQC sheen AB3053 Mayer Rod Big data

+TQC sheen AB3053 Mayer RodKnowledge

+Navigation