TQC AB3065 wet-film prepative rod 60μm WFT application width 320mm

The Dutch TQC wet-film preparatory rod AB3065 conforms to the ASTM D1084 standard, the material is stainless steel, the AB3065 wet-film preparatory rod can be prepared with a wet film thickness of 60μm and an application width of 320mm.

Brand

SKU: NB009834

TQC sheen

Model

AB3065

Get Quote

TQC sheen shop

Information

Datasheet

What else did others buy

Pushen XB-I 25μm XB rod, length 240mm

$ 98.00
Coating Bar, LABOratory Manual Coating Wire Bar 12μm Measurement Scraper Bar XB Applicator Bar

$ 111.00
Japan OSP-15/250 Applicator rod WFT 15μm length 250mm

$ 154.00
RK K303.10.2 No. 2 Coater wire rod K303 Coater special film thickness 12μm

$ 195.00
Japan OSP-17/250 formed coating bar WFT 17μm length 250mm

$ 154.00

Genuinegoods

TQC sheen AB3065 Mayer RodOverview
Specifications
Comments
FAQs

AB3065

Mayer Rod

Introduction

The coating width of the Dutch TQC filament winding wet film preparation rod is 320mm, and the thickness of the wet film that can be prepared is 4~200μm.

Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. The TQC wet film preparation rod is made of stainless steel, which has good acid and alkali resistance. Wet film preparation rods can be used in conjunction with automatic coaters.

Dutch TQC wet film preparation rod AB3065

Product parameters

Model	Wet film thickness	Coating width	Overall length	Straightness	Material	craft
AB3050	4μm	320 mm	440mm	< 50 μm	stainless steel	Winding
AB3051	6μm
AB3052	8μm
AB3053	10μm
AB3054	12μm
AB3055	14μm
AB3056	15μm
AB3057	20μm
AB3058	24μm
AB3059	30μm
AB3060	34μm
AB3061	42µm
AB3062	40μm
AB3063	50μm
AB3064	56μm
AB3065	60μm
AB3066	76μm
AB3067	100μm
AB3068	120μm
AB3069	200μm

Optional

TQC sheen AB3065 Mayer RodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	60μm
Total length	440mm
Application width	320mm
grip width	60+60mm
material	stainless steel

TQC sheen AB3065 Mayer Rod Packing list

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

We use emulsion paint to measure covering power, just built laboratory, any suggestions?

[A]

Using Mayer-Rod to prepare emulsion paint coating on covering power cardboard is a common practice and can be applied. If you need to get good experimental results, you can buy American RDS Mayer-Rod and Leneta covering power test paper.

[Q]

The solid content is almost 26%. I want to make Dry-Film 16 microns. Is this model suitable?

[A]

suitable

+TQC sheen AB3065 Mayer Rod Big data

+TQC sheen AB3065 Mayer RodKnowledge

+Navigation