TQC AB3066 engraving coating rod 76μm WFT application width 320mm

TQC engraving coating rod AB3066 is suitable for Spreader 76 μm thick wet-film, made of stainless steel, AB3066 engraving coating rod rod Total length of 440mm, each end has a 60mm long grip part.

Brand

SKU: NB009835

TQC sheen

Model

AB3066

Get Quote

TQC sheen shop

Information

Datasheet

What else did others buy

Genuinegoods

TQC sheen AB3066 Mayer RodOverview
Specifications
Comments
FAQs

AB3066

Mayer Rod

Introduction

The coating width of the Dutch TQC filament wound engraving coating rod is 320mm, and the thickness of the wet film that can be prepared is 4~200μm.

Wire bar applicators, also known as threaded wire bars, are ideal for preparing films on paper or plastic. In addition, it is also suitable for film making on soft substrates. TQC engraving coating rod is made of stainless steel, which has good acid and alkali resistance. The engraved applicator can be used in conjunction with the automatic coater.

Dutch TQC wet film preparation rod AB3065

Product parameters

Model	Wet film thickness	Coating width	Overall length	Straightness	Material	craft
AB3050	4μm	320 mm	440mm	< 50 μm	stainless steel	Winding
AB3051	6μm
AB3052	8μm
AB3053	10μm
AB3054	12μm
AB3055	14μm
AB3056	15μm
AB3057	20μm
AB3058	24μm
AB3059	30μm
AB3060	34μm
AB3061	42µm
AB3062	40μm
AB3063	50μm
AB3064	56μm
AB3065	60μm
AB3066	76μm
AB3067	100μm
AB3068	120μm
AB3069	200μm

Optional

TQC sheen AB3066 Mayer RodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	76μm
Total length	440mm
Application width	320mm
grip width	60+60mm
material	stainless steel

TQC sheen AB3066 Mayer Rod Packing list

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can silicone coatings be applied to quartz Glass substrates?

[A]

Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.

[Q]

Solid content of the sample is 40%, Dry-Film is 30 microns, do you have any suggestions?

[A]

This one is fine.

+TQC sheen AB3066 Mayer Rod Big data

+TQC sheen AB3066 Mayer RodKnowledge

+Navigation