Home> Library> Read
📖

Reader's Guide

This manual is compiled based on manufacturer's data. Due to equipment batch changes, the content may not fully match every physical unit. Please refer to the actual operation and on-device labels.

Copyright belongs to the manufacturer. For internal reference of purchasers only. If safety parameters in the manual differ from the physical unit, please suspend operation and consult our engineer for confirmation.

Disclaimer: This manual is for reference only. In case of any discrepancy, the physical unit shall prevail. Our company assumes no liability for any consequences arising from operations based on this manual.

YUZHOU QG-PCB30 manual integrated precision cutting machine album

YUZHOU QG-PCB30 manual self-integrated precision cutting machine album, introduces Touchscreen control, manual automatic double feed mode, suitable for PCB board and metal small cutting, equipped with safety protection and circulating chilling down system.

QG-PCB30 Manual and Automatic Precision Cutting Machine

QG-PCB30 appearance image        Cutting machine operation interface    

Product Introduction

The QG-PCB30 automatic precision cutting machine uses a speed-regulating motor, which drives the cutting discs to achieve effective speed via belt transmission. Touchscreen display and operation provide clear visuals and well-organized functional layouts, allowing free setting of parameters to make cutting preparation more efficient. The machine can select the right hand-crank runner to control the spindle push mode or platform push mode according to different materials or personal usage habits, and can also automatically cut according to set parameters. The overall design of the machine is exquisite, with an independent stainless steel circulation filter cooling tank, combined with a mixture of 80% water and 20% cutting fluid to lubricate the cutting discs and samples, effectively preventing surface heating and burns of samples and preventing rust of guide rails and ball screws. This machine is equipped with a lid opening and shutdown safety protection function. The working area adopts a fully enclosed structure with a transparent protective cover for observation during cutting. The work platform can be configured with different fixtures, and the clamping device can be freely removed and cleaned. The QG-PCB30 desktop cutting machine features a compact yet rich function, suitable for cutting metallographic samples such as PCB boards, metal materials within Φ30mm, electronic components, and embedded parts. It features a simple and attractive appearance, user-friendly interface, and high cost performance, making it suitable for cutting small parts.

Main parameters

ModelQG-PCB30
Cutting methodManual/Automatic, spindle feed or platform feed
Knife feeding speedManual control/automatic adjustment 1-36mm/min (step length adjustment 0.1mm/min)
Cutting blade dimensionsΦ180 × 0.8 × Φ22 mm
Maximum cutting diameterΦ30 mm
Maximum travel timeSpindle travel is 140mm, platform travel is 230mm
Spindle speed500-3000r/min

Electrical and mechanical

Motor power1.2 kW
Cutting platform dimensions245×415 mm, 8mm T-groove
Cutting fixturesQuick fixture, jaw height 45mm; Vertical fixture, opening 27mm
Display and control5.7-inch touchscreen display and control
Power inputSingle-phase 220V, 50Hz, 8A
Pump flow rate16 L/min
External dimensions620×740×380 mm
Net weight80 kg

Standard configuration

NameSpecificationsQuantity
Main unit
1 unit
Cutting piecesΦ180×0.8×Φ22mm, 金刚石砂轮片1 piece (already installed on the main unit)
Cutting fluid3kg1 bucket
Dumb wrench22mm, 14×17mmOne handful each
Hex key4mm1 handful
Custom wrenchesUsed for vertical fixtures1 handful
Vertical fixtures
2
Power cord
1 piece
Manual
1 copy
Certificate of Conformity
1 copy
🛡️ Cover opening and shutdown safety protection        
💧 Built-in circulating filter water tank        
⚙️ Dual feeding: automatic/manual        

Easy to operate · Touch control

5.7-inch touchscreen display and operation, freely setting cutting parameters, seamless switching between manual and automatic modes. There are two modes: right-mounted handwheel and platform push, adapting to different operating habits.

Touch operation interface        

Precision and Compact · Flexible clamping

The compact body design features an 8mm T-shaped platform with vertical and quick fixtures, allowing free removal and cleaning. Maximum cutting diameter is 30mm, suitable for PCB boards, small metal parts, etc.

Cutting machine workbench        
If there are any changes to the technical specifications of the product, the actual product shall prevail