JingKeLian QFH 11 teeth and Factory QFH 2*10mm compare

Model selection comparator If you have any questions, please click below Service	JingKeLian QFH 11 teeth Cross-cut adhesion Tester 690.0 RMB China Detail	Factory QFH 2*10mm Cross-cut knife In coming China Detail

Cut Spacing	1mm 2mm 3mm	2mm
Number of Cutting Edges	11	11
Test substrate	Hard substrate	Hard substrate Soft substrate
Measured film thickness	0 ~ 60µm 61 ~ 120m 121 ~ 250µm	0 ~ 60µm
Cutter Type	Multi-blade	Multi-blade
Applicable standard	ISO 2409	GB/T 9286 ASTM D3359 ISO 2409
Miscellaneous

Cut Spacing

1mm 2mm 3mm

2mm

Number of Cutting Edges

Test substrate

Hard substrate

Hard substrate Soft substrate

Measured film thickness

0 ~ 60µm 61 ~ 120m 121 ~ 250µm

0 ~ 60µm

Cutter Type

Multi-blade

Applicable standard

ISO 2409

GB/T 9286 ASTM D3359 ISO 2409

Miscellaneous

Number of teeth

11 teeth

Tooth spacing

1mm、2mm、3mm

2mm

Instrument material

application standard

ISO2409-1974

Applicable film thickness environment

Suitable for hard substrates with film thickness of 61μm~ 120μm or soft substrates with thickness < 120μm (wood, plastic)

Appearance size

instrument Weight

material

aluminum

principle

A lattice pattern is cut and penetrated on the coating using a tool of a specific specification, and then a six-level classification evaluation is carried out according to the degree of separation between the coating and the substrate after cutting.

function

The adhesion of the coating is evaluated by cutting and penetrating the lattice pattern of the coating and then evaluating the resistance of the coating to separate from the substrate.

Friendly reminder: This page is a comparison of JingKeLian QFH 11 teeth,Factory QFH 2*10mm.NBCLab only provides you with the similarities and differences of the product in the model and specifications.

For more information about JingKeLian QFH 11 teeth,Factory QFH 2*10mmsimilarities and differences, please refer to the NBCLab product details.