![]() Model selection comparator
If you have any questions, please click below
|
![]() ZKHS GDJS-800C Temperature&Humidity Cycling Test Chamber
77200.0 RMB
ChinaDetail
|
![]() Moderner XTH-080B High-low temperature alternating (heat and humidity) Test Chamber
In coming
ChinaDetail
|
|---|
| Min-TEMP | -40℃ | -40℃ | |||
|---|---|---|---|---|---|
| Max-TEMP | >100℃ | >100℃ | |||
| Min-RH | ≤40%RH | ≤20%RH | |||
| Max-humidity | 98% RH | 98% RH | |||
| Volume | ≤800L | ≤800L | |||
| TEMP fluctuation | ±0.5℃ | ±0.5℃ | |||
| Humidity deviation | ±2% ±2.5% ±3% | ±3% | |||
| Interior size | 800*1000*1000mm | 1000*1000*800mm | |||
|---|---|---|---|---|---|
| Temperature range | -40~150℃ | -40~150℃ | |||
| Humidity control range | 30~98%R.H | 20~98%R.H | |||
| Temperature Fluctuation | ≤±0.5℃ | ≤±0.5℃ | |||
| Humidity Deviation | +2、-3%R.H | ||||
| Heating rate | -40→100℃≈45min | -40~+100℃≤45mins;-40~+150℃≤60mins | |||
| Cooling rate | 25~-60℃≈65min | ﹢20~-40℃≤70mins | |||
| display | (7.0 inch) large screen screen programmable touch temperature and humidity Controller | ||||
| Accuracy range | Setting Accuracy: temperature ± 0.1 ℃, humidity ± 1% R.H | ||||
| Temperature transducer | Platinum resistance PT100Ω/MV | High-precision platinum resistor (PT100) | |||
| Heating system | Fully independent system, nickel-chromium alloy electric heating heater | Nickel chromium wire heating | |||
| Humidification system | Built-in isolated, all stainless steel shallow surface evaporative humidifier | ||||
| Dehumidification system | Adopt evaporator coil dewpoint temperature laminar flow contact dehumidification method | ||||
| Refrigeration system | Original French "Taikang", fully enclosed air-cooled compression refrigeration method | Imported fully enclosed compressor | |||
| Circulatory system | Temperature-resistant and low-noise air-conditioned motor, multi-leaf centrifugal wind turbine | ||||
| Enclosure Material | A3 steel plate electrostatic spray treatment | Cold rolled steel plate | |||
| Inner chamber material | SUS304 stainless steel high quality mirror steel plate | ||||
| Thermal insulation material | Polyurethane Rigid Foam, Ultrafine Glass Fiber Cotton | ||||
| Door frame insulation | Double Layer High and Low Temperature Conditioning Silicone Rubber Door Seal | ||||
| Timer | 0~9999 M, H adjustable | ||||
| Standard configuration | Multi-layer heating and defrosting with lighting Glass window 1 set, 2 test racks, 1 test lead hole φ50mm | ||||
| Safety Devices | Leakage, short circuit, over temperature, water shortage, motor overheating, compressor overVoltage, overload, overcurrent protection | ||||
| Power | AC220V ± 10% 50Hz AC380V? 10% 50Hz three-phase five-wire system | AC220V 50Hz | |||
| Environment temperature | 5~30℃ | ||||
| Environment humidity | ≤85%R.H | ||||
| Temperature Uniformity | ≤+2℃ | ≤2℃ | |||
Friendly reminder: This page is a comparison of ZKHS GDJS-800C,Moderner XTH-080B.NBCLab only provides you with the similarities and differences of the product in the model and specifications.
For more information about ZKHS GDJS-800C,Moderner XTH-080Bsimilarities and differences, please refer to the NBCLab product details.
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.