DAKOTA CMXDL+ and Ipre UT700 compare

Home> Ultrasonic Thickness Gauge> DAKOTA> Compare

Hide the sameHighlight differences

Model selection comparator If you have any questions, please click below Service	DAKOTA CMXDL+ Ultrasonic Thickness Gauge In coming United States Detail	Ipre UT700 Ultrasonic Thickness Gauge 2800.0 RMB China Detail

Model comparison

Measurable Materials	The material itself Coating	The material itself
Measuring Range	0~200mm	0~200mm
Error	Miscellaneous	1%
Calibration Certificate	No certificate	No certificate
Probe Type	Split probe	Split probe
Application environment
Coating Penetration		No penetrating coating function
Accessories

Parameter comparison

Measurement range	1.0~152mm
Probe Frequency	5MHz dual crystal probe
Probe style	Split probe
Probe diameter	Φ6.35mm
Probe line length	4 foot cable
Sensors Contact Temperature
Lower limit of pipe measurement
measurement error
Display resolution	+/- 0.001 inches (0.01 mm ）， +/- 0.0001 inches (0.001 mm)
unit system	Imperial and metric systems
Calibration method	Single-point and two-point calibrating options for materials and coatings, or select the basic material type
Measurement mode	Coating off: pulse echo PE; coating on: pulse echo coating PECT; temperature compensation: pulse echo temperature compensation PETP; through coating: echo EE; through coating verification: echo only echo verification E-EV; coating: coating CT
Repeatability
Measurement speed	0.0122 to 0.7300 in./ms (309.88 to 18542 m/s)
Storage Capacity	4 Gb Internal SD Card
data statistics
Speed of sound		1000-9999m/s
Speed of sound storage
Standards
Display	1/8VGA gray scale display (240 x 160 pixels). Visible area 2.4x1.8 inches (62 x 45.7mm). EL backlight (on/off/automatic). 25Hz screen refresh rate.
Operating language	English
Interface	Bidirectional RS232 serial port. Windows ® PC interface software.
Application Software
Protection level
Environmental temperature	14 to 140 ° F (-10 ℃ to 60 ℃)
Operating humidity
Storage temperature
Power Supply	Three 1.5V alkaline or 1.2V NiCad AA batteries
power consumption
Operating Time	NI-MH and alkaline batteries: gray scale 35 hours, color 12 hours. Nicad: gray scale 10 hours, color 5 hours.
Host size	63.516531.5mm
Body material
Weight	13.5 ounces (with battery)
Application
Automatic shutdown	5 minutes free	2 consecutive minutes (can be set) automatic shutdown without action, with switch button
Certificate type	Factory calibrated to NIST and MIL-STD-45662.
Sensing Connector type	Two LEMO 00 Connectors
Additional features	Automatic detection zeroing, recognition and temperature compensation. 64 custom setting configurations. High speed scanning with up to 50 readings per second. Audible alerts with Upper/Lower limits. Built-in differential mode for QC checking.
pulse generator	Double square wave pulse generator
receiver	Dual Receiver - Manual or AGC gain control over 110 dB. Adjustable damping (50-1500 ohms).
Timer	Precision TCXO with Single Pulse 100 MHz 8-Bit Ultra-Low Power Digitizer
keyboard	A membrane switch pad with 12 tactile keys
Pulse echo mode (PE)	(Pit and defect detection) Measurement range 0.63 to 1219.2 mm
Pulse echo coating mode (PECT)	(Material, coating, pit and defect detection): Material: 0.63 to 1219.2 mm. coating: 0.01 to 2.54 mm
Pulse echo temperature compensation mode (PETP)	(Pit and defect detection) Automatic temperature compensation - Measurement range 0.63 to 1219.2 mm
Echo Mode (EE)	Via coatings and coatings) in sizes from 2.54 to 152.4 mm
Echo Mode (E-EV)	Via coatings and coatings) in Dimensions of 1.27 to 25.4 mm
Only coating mode (CT)	(Coating thickness) 0.0127 to 2.54 mm

Friendly reminder: This page is a comparison of DAKOTA CMXDL+,Ipre UT700.NBCLab only provides you with the similarities and differences of the product in the model and specifications.

For more information about DAKOTA CMXDL+,Ipre UT700similarities and differences, please refer to the NBCLab product details.

Focus on online sales of Lab Testing Instruments