NBCHAO
Lab Testing Instrument
Cart(0)
 Model selection comparator
If you have any questions, please click below
|
 Apkjgroup AP-HX-150D Programmable humidity chamber
39100.0 RMB
 ChinaDetail
|
 Factory NBC-150L-60 Programmable Constant Temperature & Humidity Test Chamber
21430.0 RMB
ChinaDetail
|
|---|
Model comparison
| Min-TEMP | -60℃ | -60℃ | |||
|---|---|---|---|---|---|
| Max-TEMP | ＞100℃ | ＞100℃ | |||
| Min-RH | ≤20%RH | ≤20%RH | |||
| Max-humidity | 98% RH | 98% RH | |||
| Volume | ≤150L | ≤150L | |||
| TEMP fluctuation | ±0.5℃ | ±0.5℃ ±1℃ | |||
| Humidity deviation | ±2% | ±1% ±1.5% ±2% | |||
Parameter comparison
| Interior Volume | 150L | 150L | |||
|---|---|---|---|---|---|
| Temperature range | -60 ℃~ + 150 ℃ (air-cooled) | -60~150℃ | |||
| temperature resolution | 0.01℃ | ||||
| Temperature fluctuation | ±0.5℃ | ||||
| Temperature Uniformity | ±2.0℃ | ±1.5-2℃ | |||
| Humidity control range | 20%～98%RH | 20~98%R.H | |||
| Humidity Deviation | ±2%R.H | ±1~2% | |||
| Input power | |||||
| Operating Environment | The temperature of the environment around the machine is maintained between + 5~ + 30 ℃, Relative Humidity: ≤ 85%; air pressure: 86kPa~ 106kPa normal atmospheric pressure | ||||
| Continuous Operating Time | |||||
| Power | 220V/50HZ | ||||
| Interior size | 500*600*500mm | 500*500*600mm | |||
| Overall Dimensions | 780 * 1850 * 1450mm (W * H * D) The actual size shall prevail | ||||
| Shelf (std.) | |||||
| Cooling rate | RT~ 0 ℃/about 25min (no load) about 1 ℃/min | 1 ℃/min (no-load nonlinear) | |||
| Heating rate | RT~ + 150 ℃/about 40min (no load) about 3 ℃/min | 3 ℃/min nonlinear no-load | |||
| Humidity analysis Accuracy | 0.1%R.H | ||||
| Humidity Uniformity | ≤±3%R.H | ±1-3.0%R.H | |||
| Inner box material | High quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, operating temperature -196 ℃~ 800 ℃). | Mirror stainless steel plate (SUS #304) | |||
| Enclosure Material | Cold rolled steel plate | Mirror stainless steel plate (SUS #304) | |||
| Outer box light source | High brightness lamp | ||||
| Observation window | Observe the use of the sample | ||||
| Window sweat-proof design | Electric heater device is used to prevent water vapor from condensing (40W) | ||||
| test hole | Can be used for external test power cord and signal (diameter 50mm) | ||||
| Machine pulley | Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel) | ||||
| Insulation layer | Rigid polyurethane foam | ||||
| In-box tray rack | Two movable adjustable grid reels and stainless steel strip grid reels (5.0cm per grid) | ||||
| Box door | Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage | ||||
| Operating Mode | The 0 ℃~ -40 ℃ model adopts first-stage compression, and the -40 ℃~ -70 ℃ adopts binary cascade refrigeration. | ||||
| Refrigeration compressor | Original imported French Taikang fully enclosed low-noise rotary compressor or Japanese Hitachi high-efficiency fully enclosed compressor | ||||
| refrigerant | R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration system) | ||||
| Condenser | Air-cooled: finned and tube heat exchanger. Water-cooled: shell and tube heat exchanger | ||||
| Evaporator | Finned tube heat exchanger (also as dehumidifier) | ||||
| Plate heat exchanger | Stainless steel brazed plate heat exchanger (used in cascade refrigeration system) | ||||
| Throttle device | Expansion valve + capillary | ||||
| Maximum current consumption | Current: 14A; Power: 3.0KW [Voltage range: no more than +/- 10%] | ||||
| Protection compressor | Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent and overheating protection: Schneider thermal relay | ||||
| Protective heater | Chint fuse: 2 groups | ||||
| Protection instrument complete-built unit | Instrument protocol temperature upper limit over temperature protection | ||||
| Studio | SUS304 stainless steel, Film thickness to ensure no deformation, leakage, SUS304 stainless steel also has corrosion resistance, easy to clean the characteristics. | ||||
| Outer box | Library board electrostatic high temperature baking paint production; national laboratory instrument standard color, beautiful and generous; high and low temperature resistance, friction resistance. | ||||
| Test rack | SUS304 box rack machine pulley, the specific quantity is agreed on site | ||||
| Over temperature protector | Over-temperature protection of the test area, real-time display of the temperature of the test area, sound and light alarm when the temperature exceeds the upper limit and cut off the Power of the instrument. | ||||
Friendly reminder: This page is a comparison of Apkjgroup AP-HX-150D,Factory NBC-150L-60.NBCLab only provides you with the similarities and differences of the product in the model and specifications.
For more information about Apkjgroup AP-HX-150D,Factory NBC-150L-60similarities and differences, please refer to the NBCLab product details.
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.