NBCHAO
Lab Testing Instrument
Cart(0)
 Model selection comparator
If you have any questions, please click below
|
 JingKeLian QXD 50-150 Fineness of Ground Gauge
399.0 RMB
 ChinaDetail
|
 Pushen ISO-150um double-channel Grindometer
800.0 RMB
ChinaDetail
|
|---|
Model comparison
| Range | 0~150μm | 0~150μm | |||
|---|---|---|---|---|---|
| Grooves | Single Channel | Double Channel | |||
| Scale interval | 10µm | 10µm | |||
| Measurement Units | um | um Hegman Mils | |||
| Operation mode | Manual | Manual | |||
| Calibrated certificate | Without certificate | Without certificate | |||
Parameter comparison
| Scraper type | Single-channe | double-channel | |||
|---|---|---|---|---|---|
| Number of grooves | 1 | 2 | |||
| range | 50 ~ 150μ m | 0 ~ 150μ m | |||
| Scale unit | mm | μm、Hegman、Mils | |||
| Graduation | 10µm | ||||
| Scraper material | stainless steelstainless steel | Stainless steel (40Cr13 forging)stainless steel | |||
| Scraper size | 155*50*12mm68×40×6.5mm | 175*65*15mm | |||
| Groove size | 13*120mm | ||||
| Scraper material | stainless steelstainless steel | Stainless steel (40Cr13 forging)stainless steel | |||
| Scraper size | 155*50*12mm68×40×6.5mm | 175*65*15mm | |||
| Applicable standard | GB1724-79 | GB/T 6753.1-2007 | |||
| Surface finish on scraper | 10 | ||||
| Chute bottom surface finish | 8 | ||||
| Scraper two edge finish | 8 | ||||
| Scraper two knife edge plane flatness | 0.002mm | ||||
| Flat flatness on scraper | 0.003mm | ||||
| Bottom plane flatness of chute | 0.003mm | ||||
Friendly reminder: This page is a comparison of JingKeLian QXD 50-150,Pushen ISO-150um.NBCLab only provides you with the similarities and differences of the product in the model and specifications.
For more information about JingKeLian QXD 50-150,Pushen ISO-150umsimilarities and differences, please refer to the NBCLab product details.
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.