NBCHAO
Lab Testing Instrument
Cart(0)
 Model selection comparator
If you have any questions, please click below
|
 JingKeLian QXD 50-150 Fineness of Ground Gauge
399.0 RMB
 ChinaDetail
|
 TRUIT TR 1201/150 Single-Channe Fineness Gauge
610.0 RMB
ChinaDetail
|
|---|
Model comparison
| Range | 0~150μm | 0~150μm | |||
|---|---|---|---|---|---|
| Grooves | Single Channel | Single Channel | |||
| Scale interval | 10µm | Miscellaneous | |||
| Measurement Units | um | um Hegman | |||
| Operation mode | Manual | Manual | |||
| Calibrated certificate | Without certificate | Without certificate | |||
Parameter comparison
| Scraper type | Single-channe | single-channe | |||
|---|---|---|---|---|---|
| Number of grooves | 1 | 1 | |||
| range | 50 ~ 150μ m | 0~150μm | |||
| Scale unit | mm | ||||
| Graduation | 10µm | 7.5μm | |||
| Scraper material | stainless steelstainless steel | Wear and corrosion resistant alloy steel | |||
| Scraper size | 155*50*12mm68×40×6.5mm | ||||
| Groove size | 13*120mm | 140*12.5mm | |||
| Scraper material | stainless steelstainless steel | Wear and corrosion resistant alloy steel | |||
| Scraper size | 155*50*12mm68×40×6.5mm | ||||
| Applicable standard | GB1724-79 | ||||
| Surface finish on scraper | 10 | ||||
| Chute bottom surface finish | 8 | ||||
| Scraper two edge finish | 8 | ||||
| Scraper two knife edge plane flatness | 0.002mm | ||||
| Flat flatness on scraper | 0.003mm | ||||
| Bottom plane flatness of chute | 0.003mm | ||||
Friendly reminder: This page is a comparison of JingKeLian QXD 50-150,TRUIT TR 1201/150.NBCLab only provides you with the similarities and differences of the product in the model and specifications.
For more information about JingKeLian QXD 50-150,TRUIT TR 1201/150similarities and differences, please refer to the NBCLab product details.
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.