This document specifies the performance test method of resilience flooring for architectural decoration, which is applicable to the performance test of resilience flooring. The Miscellaneous specification document is not quoted in the document, and there are no terms and definitions that need to be defined. The standard test conditions are temperature (23 ± 2) C and relative humidity (50 ± 5) %. For the measurement of dimensions, a tape measure and vernier calliper are used, which are accurate to 1m and 1mm, respectively. The measurement of length and width shall be carried out under standard conditions, and the length and width of the coil flooring shall take the arithmetic mean of multiple Measured values and the MIN Minimum, respectively.