Fineness Gauge

Single-channe, range 0~50μm, scale unit μm, accuracy +/- 5μm, scraper material stainless steel, Applicable standard ISO1524-1983, recommended range 15-40μm.

Large wide-channel, range 0~50μm, Graduation 5μm, scraper material stainless steel, with two scales of micron and Hegman, applicable to GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210

Double-channel, range 0~50μm, scale unit μm, scraper material stainless steel, scraper size 175mm * 65mm * 13mm, groove size 140 * 12.5mm, drawdown blade material stainless steel, can be used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Single-channe, zirconia ceramic material, suitable for heavy corrosion materials, range 0-100μm, Graduation 5μm, there are three units of μm, Hegman, mils, groove size 140 × 12.5mm.

Single-channe Fineness gauge, with a range of 0 to 150 μm, made of stainless steel, is specially used to determine the particle size and dispersion of pigments and impurities in Coatings, paint slurries, inks and other liquids and slurries. The degree of dispersion is expressed by microns or "Hegman"

Single-channe, range 0~50μm, scale unit μm, Graduation 5μm, scraper material stainless steel, scraper size 155 * 50 * 12mm, groove size 13 * 120mm, drawdown blade material stainless steel, used to determine the fineness of pigments, fillers and impurities in Coating, in microns.

Single-channe, range 0~100μm, scale unit μm, Graduation 5μm, scraper material stainless steel, used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Large double-channel, 0~100μm, scale unit μm, Hegman, stainless steel, suitable for standards GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210.

Double-channel, wear-resistant and corrosion-resistant alloy steel, range 0-100μm, Graduation 5μm, groove size 140 × 12.5mm.

Single-channe, high-quality wear-resistant and corrosion-resistant alloy steel, range 0-100μm, Graduation 5μm, groove size 140 × 12.5mm.

Double-channel, zirconia ceramic material, suitable for heavy corrosion materials, range 0-100μm, Graduation 5μm, there are three units of μm, Hegman, mils, groove size 140 × 12.5mm.

Single-channe, range 0~50μm, scale unit μm, scraper material Cr12 molybdenum vanadium, scraper size 175 * 65 * 13mm, applicable to standard GB/T 1724, Graduation 5μm.

Single-channe, range 0~50μm, scale unit μm, scraper material Cr12 molybdenum vanadium, scraper size 155 * 50 * 13mm, applicable standard GB/T1724, Graduation 5μm.

Double-channel, range 0~50μm, Graduation 5μm, Cr12 molybdenum vanadium material, scale unit μm.