STIP-scan

Measurement range 0.00-20 mg/L, resolution 0.01mg/L, accuracy @25 ℃: +/- 3 %； +/- 0.5mg/L of reading, commonly used in drinking water monitoring, industrial production process control and other fields to ensure that the concentration of fluoride ions in water is within the safe range.

Residual chlorine Measurement range 0.00 to 5.00 mg/L (as Cl2), resolution 0.01 mg/L, total chlorine Measurement range 0to 500 mg/L (as Cl2), resolution 1 mg/L, using innovative Optical inspection system design, with good accuracy.

CD100T desktop touch screen conductivity, Dissolved Oxygen Meter, intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

Measurement range 0.00 to 3.50 mg/L (as SDBS), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.04 mg/L +/- 3% of reading, widely used in water treatment, environment monitoring, detergent production and detergent residue detection.

Measurement range 0.0 to 20.0 mg/L; 10 to 100 mg/L (as K), resolution 0.1 mg/L, accuracy @25 ℃: +/- 3 mg/L +/- 7% of reading, commonly used in soil and agricultural analysis to assess soil fertility and crop nutritional status, it can also be used to monitor oxidation potassium content in wastewater, etc.

Measurement range: -2.000 to 20.000 pH, ORP/mV: +/-2000.0 mV, ISE: 1.00 x 10-6 to 9.99 x 1010 Ion concentration units, linear and non-linear temperature compensation, choice of three salinity measurement ranges, up to four point EC calibrated and single point salinity calibrated.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.01 mg/L +/- 8% of reading, commonly used in environment monitoring, water quality control, industrial process control and other fields to ensure that the iron concentration in water is within the safe range and meets the requirements of relevant standards and regulations.

Measurement range 0 to 300 μg/L (as Cr (VI)), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 4% of reading, commonly used in industrial wastewater treatment, environment monitoring and water quality control.

Configure HI763100 conductivity dedicated electrode, support manual, manual continuous and time interval three storage modes, with automatic temperature compensation.

Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 3% of reading, commonly used in environment monitoring, drinking water mass detection, industrial process control and other fields.

Measurement range 0.000 to 1.500 mg/L (as Cu2 +), resolution 0.001 mg/L, accuracy @25 ℃: +/- 0.010 mg/L +/- 5% of reading, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Mg hardness measurement range 0.00 to 2.00 mg/L (as CaCO3), resolution 0.01 mg/L, accuracy @25 ℃ reading +/- 0.11 mg/L +/- 5%; High quality Optical inspection filter to ensure measurement accuracy and accuracy.

PD100, PH module: automatic identification of calibrating solution, calibrating point: 1~ 3 point Automatic calibration, CH, USA, NIST calibrating solution optional, support pure water compensation and ammonia compensation mode.

0.00~20.00Mg/L, accuracy +/- 0.30mg/L, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

PC100T, pH module: calibrating point: 1~ 5 point Automatic calibration, CH, USA, NIST calibrated solution optional, support pure water compensation and ammonia compensation mode.

0-2000.0mS/cm, accuracy +/- 0.5% F. S, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.