STIP-scan

Measurement range LR (P1): O-250mg/L (ppm) CaCO; Resolution 1 mg/L, accuracy @25 ℃ LR: reading +/- 4% +/- 5mg/L; bandwidth accuracy +/- 1.0 nm, using innovative Optical inspection system design, with good accuracy.

Measurement range of chlorine dioxide 0.00 to 2.00 mg/L (as ClO2), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.01 mg/L +/- 5% of reading, commonly used in drinking water treatment, swimming pool disinfection, industrial production and other fields.

Measurement range 0 to 400 mg/L (as Ca2 +), resolution 1 mg/L, mg Measurement range 0 to 150 mg/L (as Mg2 +), resolution 1 mg/L, commonly used in water treatment, drinking water monitoring, industrial production and other fields.

Measurement range: pH-2.00 to 16.00pH, -2.000 to 16.000pH, temperature compensation, micro USB interface to achieve data transmission and charging functions to ensure further analysis and management of measurement data.

Reagent name High concentration ammonia nitrogen, range 0.0~100.0 mg/L (as NH3 +), the number of times 300.

Measurement range 0.0 to 100.0 mg/L (as NH3 +), resolution 0.1 mg/L, accuracy @+/- 0.5 mg/L +/- 5% of 25 ℃ reading, automatic storage of the last 50 measurements, battery life greater than 800 hours (without backlight).

Measurement range: PH 2.00 - 16.00pH, ORP 699.9mV, +/-1999mV, built-in three calibrated points, automatic recognition of one or two points calibrated, easy to operate and economical.

Automatic compensation based on temperature changes, built-in microchip stores Sensor type, serial number and calibrated information, silver cathode with zinc anode, integrated temperature sensor and easy-to-replace HDPE film cover.

Measurement range 0.00 to 2.00 mg/L (as ClO2), resolution 0.01 mg/L, accuracy @25 ℃ reading +/- 0.10 mg/L +/- 5%, high quality Optical inspection filter, High measurement Stability and less wavelength error ensure Measurement accuracy and accuracy.

Operating temperature range 0 to 50 ℃, fast calibrating, Measured value for temperature compensation, sensitive PTFE membrane can be replaced in seconds, ideal for field use.

Measurement range 0.00-5 mg/L, resolution 0.01mg/L, accuracy @25 ℃ reading +/- 3% +/- 0.03mg/L, LED high-quality Light source system, high-quality Optical inspection filter to ensure that the sample measurement results are consistent with the user.

Measurement range 0 to 150 mg/L (e.g. SO42-), resolution 1 mg/L, accuracy @25 ℃： +/- 5 mg/L +/- 3%, commonly used in water quality monitoring, environment protection and industrial production.

The HI97701 is a portable residual chlorine photometer with outstanding performance and a convenient portable design. Compliant with IP67 waterproof standards, it adopts an innovative Optical inspection system design to ensure high-precision, repeatability, and more efficient measurement time.

LED Light source, bandpass filter wavelength 525 & 610 nm; Bandwidth 8nm; Wavelength Accuracy +/- 1.0 nm, can be used for the measurement of pH acid alkalinity, calcium ions, nitrate, phosphoric acid and other parameters, is a powerful and widely used water quality analysis instrument.

Measurement range 0 to 200 mg/L (as SiO2), resolution 1 mg/L, accuracy @25 ℃: +/- 1 mg/L +/- 5% of reading, widely used in water treatment, drinking water monitoring, environment protection and industrial process control.

Residual chlorine Measurement range 0.00 to 10.00 mg/L (as Cl2), resolution 0.01 mg/L, accuracy reading of +/- 0.03 mg/L +/- 3%, widely used in water treatment, swimming pool monitoring, drinking water mass detection, etc.

Residual chlorine measurement range: 0.00 to 5.00mg/L (asCl2), resolution: 0.01mg/L, accuracy: +/- 0.03mg/L +/- 3% of reading, total chlorine measurement range 0.00 to 5.00mg/L (asCl2), built-in reaction Timer to ensure consistent results between sample measurements and users.

Measurement range 0.00-20 mg/L, resolution 0.01mg/L, accuracy @25 ℃: +/- 3 %； +/- 0.5mg/L of reading, commonly used in drinking water monitoring, industrial production process control and other fields to ensure that the concentration of fluoride ions in water is within the safe range.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, Mn Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Measurement range 0.00 to 3.50 mg/L (as SDBS), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.04 mg/L +/- 3% of reading, widely used in water treatment, environment monitoring, detergent production and detergent residue detection.

Measurement range 0 to 300% oxygen saturation, Operating temperature range 0 to 50 ℃, integrated temperature sensor and easily replaceable PTFE membrane cover, the ability to transfer information allows hot swapping of the probe without recalibrating.

Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 3% of reading, commonly used in environment monitoring, drinking water mass detection, industrial process control and other fields.