STIP-scan

Simultaneously detect COD, ammonia nitrogen, Total phosphorus, Total nitrogen, heavy metals (total chromium, hexavalent chromium, copper, zinc, nickel, iron) several parameters, built-in thermal printer, using digestion Colorimetric integrated tube Colorimetric.

Detect the content of ammonia nitrogen, the range is 0.05mg/L-50mg/L, no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ535-2009 standard.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity five parameters, digestion Colorimetric integrated tube detection, Spectrophotometric method, spectra-trophotometry detection, Sensitivity up to 0.001mg/L.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, total chromium, hexavalent chromium, copper, zinc eight parameters, imported cold Light source, Sensitivity up to 0.001mg/L, standard pipette gun and digestion instrument.

Detect the Total nitrogen content, the range is 0.5mg/L-100mg/L (measured in sections), the digestion is carried out in a Water Bath at 125 ℃ for 30min, and the digestion Colorimetric integrated detection is adopted, which conforms to the EPA certification method.

Detect the content of hexavalent chromium, the range is 0.01mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB7467-87 standard.

Simultaneous detection of total chromium, hexavalent chromium, copper, nickel, zinc, iron several heavy metals, Spectrophotometric method, spectrophotometry detection, Sensitivity up to 0.001mg/L, standard digestion instrument and pipette gun.

Detects the content of Total phosphorus, Total nitrogen, turbidity, and suspended solids (SS) in the water, and displays the readings intuitively. It is equipped with a digestion instrument and can transmit data via USB connection.

Detection of heavy metals content, including total chromium, hexavalent chromium, copper, zinc, nickel, iron and other parameters, built-in thermal printer, using digestion Colorimetric integrated tube Colorimetric.

Can measure COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity, heavy metals, inorganic salts and other dozens of parameters, standard optional 7 kinds of reagents, spectrophotometric measurement, digestion Colorimetric integrated tube detection, equipped with digestion instrument and pipette gun.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, heavy metals (total chromium, hexavalent chromium, copper, zinc, nickel, iron) various parameters, standard digestion instrument and pipette gun, Sensitivity up to 0.001mg/L.

Detection of iron content, the range is 0.01mg/L-50mg/L (measured in sections), no digestion is required, the detection time is 15 to 20 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ/T345-2007 standard.

Detection of Total phosphorus (TP) content, range 0.01-50 mg/L, using GB 11893-89 "Water quality, determination of Total phosphorus, ammonium molybdate Spectrophotometric method, spectra-trophotometry" detection method, built-in thermal printer, using digestion Colorimetric integrated tube.

Detect the content of ammonia nitrogen, Total phosphorus, Total nitrogen, turbidity and suspended solids (SS) in water, in line with the standard, built-in thermal printer, and the measurement error is ≤ +/- 5%.

At the same time, the parameters of four heavy metals, total chromium, hexavalent chromium, copper and zinc, were detected by digestion Colorimetric integrated tube, and imported cold Light source, Sensitivity was as high as 0.001mg/L.

The chemical oxygen demand (COD) value in water was measured, and two COD detection methods were built in, the ranges were 0-10000mg/L and 0-15000mg/L, respectively, and the digestion Colorimetric integrated tube Colorimetric was used.

Detect the Total phosphorus content in water quality, the range is 0.02mg/L-20mg/L (measured in sections), the digestion is carried out in a Water Bath at 125 ℃ for 30min, and the digestion Colorimetric integrated detection is used, which conforms to the GB11893 standard.

Detect ammonia nitrogen, Total phosphorus, turbidity, suspended solids (SS) four parameters, Miscellaneous water quality detection parameters can be expanded, built-in thermal printer, can store 30,000 measurement data.

Detect the content of COD and Total nitrogen in water, use the persulfate oxidation method to detect the Total nitrogen value, the measurement error is ≤ +/- 5%, and the built-in thermal printer.

The content of ammonia nitrogen and Total nitrogen in water was detected, and the digestion Colorimetric integrated tube Colorimetric was used to directly display the results. The HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry and HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry were used.

Detection of total chromium content, range 0.01-5 mg/L, using GB7466-87 detection method, built-in thermal printer, using digestion Colorimetric integrated tube.

Detect COD, ammonia nitrogen content, in line with HJ535-2009, HJ/T399-2007 standards, built-in thermal printer, using digestion Colorimetric integrated tube Colorimetric.

Detect the concentration value of suspended solids, the range is 5mg/L-500mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the imported cold Light source conforms to the "National Standard Weight Method" standard.

Detect the cyanide content, the range is 0.004mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ484-2009 standard.