STIP-scan

CD100, with power-off protection and factory reset function, Data storage: 450 groups (number, value, unit, temperature, time).

PC10, conductivity module: 1 point calibrated, automatically identify calibrated solution, support electrode calibration, standard solution calibration, can be switched to TDS/salinity/resistivity.

Simultaneous measurement of pH, conductivity, TDS, salinity value, automatic electrode slope display, automatic temperature compensation and calibrating reminder, support one key reset.

High performance portable multiparameter Water Quality Analyzer with 8 measurement functions for outdoor measurement of pH, Oxidation-reduction potential (ORP), Ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity, dissolved oxygen concentration and saturation.

Detect the content of hexavalent chromium, the range is 0.01mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB7467-87 standard.

With CHINA electrode, pH Measurement range -2.000~20.000pH, conductivity Measurement range 0~20mS/cm, Automatic temperature compensation, Automatic calibration reminder.

With import electrode, pH Measurement range -2.000~20.000pH, conductivity Measurement range 0~20mS/cm, Automatic temperature compensation, Automatic calibration reminder.

Measurement range 5.00~200.00mg/L, error of indication ≤ +/- 5%, Repeatability ≤ 3%, Optical inspection Stability ≤ 0.002A/20min, LCD Chinese display, imported high performance, long life (100,000 hours), high luminance Light source, with narrow band filter system.

Measurement range 0.02~ 10.00mg/L. Divided into two ranges: 0.02~ 2.00mg/L, 2~ 10.00mg/L., error of indication ≤ +/- 3% FS, Optical inspection Stability < 0.002A/20min, Repeatability ≤ 3%

CHINA electrode, while detecting pH, conductivity, TDS, salinity, resistivity, automatic temperature compensation, calibrating reminder, end point locking, electrode diagnosis.

Measurement range 0.02~ 1.00mg/L, error of indication ≤ +/- 5%, Optical inspection Stability < 0.002A/20min, Repeatability ≤ 3%, can automatically process the data and directly display the nickel concentration value of the water sample.

Accurate measurement of residual chlorine and total chlorine in water, LED Light source with long life and high-performance microcontroller technology, support single and multi-point calibrating, Data storage, USB communication and waterproof and dustproof functions, suitable for drinking water, medical wastewater, swimming pool water and other water quality Determination of residual chlorine and total chlorine.

Residual chlorine, chlorine dioxide, compound residual chlorine, total chlorine, nitrite, dissolved oxygen, ammonia nitrogen, iron, copper and other parameters, with custom Linear dispersion Adjustment, error of indication +/- 5% F.S.

A high performance portable pH Conductivity Meter with 6 measurement functions for outdoor measurement of pH, mV, Oxidation-reduction potential (ORP), conductivity, total dissolved solids (TDS), salinity and resistivity of samples.

High-precision multiparameter Water Quality Analyzer, including 8 measurement functions, 15 function parameters can be customized in the setting menu, the meter is suitable for laboratory measurement of pH, ORP, Ion concentration, conductivity, TDS, salinity, resistivity, dissolved oxygen concentration and saturation

Simultaneously detect pH, conductivity, TDS, salinity, with China electrode, automatic temperature compensation, calibrated reminder, end point locking, support 500 sets of measurement data.

ORP (mV) (-1999.9~ + 1999.9) mV, rechargeable lithium battery power supply, support low power management function and power failure protection function, charging Interface standard: Type-C, easy to use, in line with European Union standards.

Measurement of hypochlorous acid (HOCL), residual chlorine, pH, temperature value, with manual/automatic temperature compensation, imported components and residual chlorine film head, power failure protection > 10 years.

pH, Oxidation-reduction potential and dissolved oxygen concentration measurement, -2.000~20.000pH, +/- 1999.9mV, 0.00~20.00mg/L, 0~105 ℃.

Standard laboratory Dissolved Oxygen Meter, 1 or 2 point calibrated, 10 function parameters can be customized in the setting menu, the meter is suitable for daily laboratory applications, Measurement accuracy: 0.2mg/L.

Import electrode, while detecting pH, conductivity, TDS, salinity, resistivity, automatic temperature compensation, calibrating reminder, end point locking, electrode diagnosis.

Measure pH/mV, conductivity and total dissolved solids (TDS) values, with a large backlit LCD screen, 1 to 5 point button calibrated.

Support pH, Oxidation-reduction potential, dissolved oxygen concentration and saturation multiparameter measurement, automatic identification of pH standard buffer, automatic electrode slope display.