STIP-scan

General TDS standard solution, TDS value 7447ppm, capacity 480ml

General TDS standard solution, TDS value 744.7 ppm, capacity 480 ml

Detection of ammonia nitrogen content, range 0.01-50 mg/L, using HJ535-2009 detection method, built-in thermal printer, using digestion Colorimetric integrated tube.

-2.000~20.000pH, accuracy +/- 0.002pH, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

Detect the content of phosphoric acid salt, the range is 0.02mg/L-20mg/L (segmented determination), without digestion, using digestion Colorimetric integrated detection, in line with HJ 670-2013 standard.

Detect Total nitrogen content, range 0.5-100mg/L, use persulfate oxidation method, built-in thermal printer, use digestion Colorimetric integrated tube, standard detection program Total nitrogen L and Total nitrogen H.

Measurement range 0-10mg/L, resolution 0.1mg/L, sexual repeability ≤ 2%, error of indication +/- 5% FS +/- 1 word, suitable for indoor and outdoor swimming pool water quality testing and various water plants.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Electrode shell stainless steel, cable length 1 meter, built-in temperature 10KΩ, electrode interface 4 cores, reference solution -, specification φ 5mm × 120mm, Measurement range 0-110 ℃

DO10 portable polarographic Dissolved Oxygen Meter, support temperature automatic compensation, pressure automatic compensation, salinity manual compensation, support full oxygen calibration, zero oxygen calibration.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

CD100T desktop touch screen conductivity, Dissolved Oxygen Meter, intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

Digestion Colorimetric integrated tube detection, detection of COD concentration value, range 5mg/L-10000mg/L (segmented), Sensitivity up to 0.001mg/L, with digestion instrument and pipette gun.

Gas sensing electrode filling solution, capacity 480 ml

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

0.00~20.00Mg/L, accuracy +/- 0.30mg/L, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

Electrode shell plastic shell, cable length 1 meter, electrode interface BNC, reference solution 3mol KCl gel - non-additive, specification φ 12mm × 120mm, Measurement range Platinum needle, +/- 1999mV

PCD10, conductivity module: 1 point calibrate, automatically identify calibrated solution, support electrode calibration, standard solution calibration, can be switched to TDS/salinity/resistivity, reference temperature can be set according to the sample solution.

Measurement range residual chlorine/total chlorine: 0.00~3.00mg/L, resolution concentration: 0.01mg/L; Absorbance: 0.001ABS, microcontroller technology, multi-point calibrating, Data storage, waterproof and dustproof.

CD10, Intelligent Operating system, with timing measurement, parameter setting, data locking, Automatic calibration and other functions. Strong data management function, maximum data storage: 3000 groups.

PD100, PH module: automatic identification of calibrating solution, calibrating point: 1~ 3 point Automatic calibration, CH, USA, NIST calibrating solution optional, support pure water compensation and ammonia compensation mode.