STIP-scan

Detect the content of silica, the range is 0.1mg/L-5mg/L (segmented measurement), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Silicon Molybdenum Blue Colorimetry" standard.

Equipped with polarographic electrodes, based on the Android Operating system, the setting menu can customize 15 functional parameters, the instrument is suitable for measurement of dissolved oxygen, BOD, OUR and SOUR, Measurement accuracy: 0.2mg/L.

Detect the nitrite content, the range is 0.002mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB7493-87 standard.

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Equipped with British original electrodes, based on Android Operating system, 2 to 5 point calibrated, setting menu can customize 12 function parameters, Measurement accuracy: 1% F.S.

Measure the relative and absolute mV value of the sample, based on the Android Operating system, 1 point offset calibrated, the setting menu can customize 10 function parameters, Measurement accuracy 0.2mV.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

Using DPD Colorimetry, it can accurately measure residual chlorine, total chlorine and chlorine dioxide in water, support single and multi-point calibrating, Data storage, USB communication and waterproof and dustproof functions, suitable for drinking water, medical wastewater, swimming pool water and other water quality Determination of residual chlorine, total chlorine and chlorine dioxide.

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".

DO10 portable polarographic Dissolved Oxygen Meter, support temperature automatic compensation, pressure automatic compensation, salinity manual compensation, support full oxygen calibration, zero oxygen calibration.

CD10, Intelligent Operating system, with timing measurement, parameter setting, data locking, Automatic calibration and other functions. Strong data management function, maximum data storage: 3000 groups.

Measurement method of permanganate index, acid potassiumhy permanganate oxidation (Colorimetry), light source wavelength 540nm, Measurement range 0.000~10.00mg/L, error of indication +/- 5% FS, Repeatability ≤ 2.0%.

PD10, rechargeable lithium battery power supply, support low-consumption function management and power-off protection function, charging Interface standard: Type-C, easy to use, in line with European Union standards.

Measurement method Noll reagent method, light source wavelength 420nm, Measurement range 0.000~4.000, error of indication ≤ +/- 10%, Repeatability ≤ 3%,