STIP-scan

Detect the content of ammonia nitrogen, the range is 0.05mg/L-50mg/L, no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ535-2009 standard.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity five parameters, digestion Colorimetric integrated tube detection, Spectrophotometric method, spectra-trophotometry detection, Sensitivity up to 0.001mg/L.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, total chromium, hexavalent chromium, copper, zinc eight parameters, imported cold Light source, Sensitivity up to 0.001mg/L, standard pipette gun and digestion instrument.

Detect the Total nitrogen content, the range is 0.5mg/L-100mg/L (measured in sections), the digestion is carried out in a Water Bath at 125 ℃ for 30min, and the digestion Colorimetric integrated detection is adopted, which conforms to the EPA certification method.

Simultaneous detection of total chromium, hexavalent chromium, copper, nickel, zinc, iron several heavy metals, Spectrophotometric method, spectrophotometry detection, Sensitivity up to 0.001mg/L, standard digestion instrument and pipette gun.

Can measure COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity, heavy metals, inorganic salts and other dozens of parameters, standard optional 7 kinds of reagents, spectrophotometric measurement, digestion Colorimetric integrated tube detection, equipped with digestion instrument and pipette gun.

Can simultaneously detect COD, ammonia nitrogen, total phosphorus, total nitrogen, heavy metals (total chromium, hexavalent chromium, copper, zinc, nickel, iron) various parameters, standard digestion instrument and pipette gun, Sensitivity up to 0.001mg/L.

Detection of iron content, the range is 0.01mg/L-50mg/L (measured in sections), no digestion is required, the detection time is 15 to 20 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ/T345-2007 standard.

At the same time, the parameters of four heavy metals, total chromium, hexavalent chromium, copper and zinc, were detected by digestion Colorimetric integrated tube, and imported cold Light source, Sensitivity was as high as 0.001mg/L.

Detect the Total phosphorus content in water quality, the range is 0.02mg/L-20mg/L (measured in sections), the digestion is carried out in a Water Bath at 125 ℃ for 30min, and the digestion Colorimetric integrated detection is used, which conforms to the GB11893 standard.

Simultaneously detect the content of COD, ammonia nitrogen, Total phosphorus, turbidity, and suspended solids, in line with HJ535-2009, GB11893-89, HJ/T399-2007 standards, using Spectrophotometric method, spectra-trophotometry and direct Colorimetry, built-in thermal printer.

Detect the concentration value of suspended solids, the range is 5mg/L-500mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the imported cold Light source conforms to the "National Standard Weight Method" standard.

Detection of residual chlorine total chlorine content, the range is 0.1-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 10 minutes, and the digestion Colorimetric integrated detection is used, which meets the standard of "TMB photometric method".

Detect the content of copper ions, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Bicyclohexanone Oxalyl Dihydrazone Method".

Detect the total chromium content, the range is 0.01mg/L-5mg/L (measured in sections), the digestion is 30min in a Water Bath at 125 ℃, and the detection time is 45-55 minutes. The digestion Colorimetric integrated detection is used, which conforms to the GB7466-87 standard.

Simultaneously detect COD, ammonia nitrogen, total phosphorus, turbidity parameters, standard digestion instrument and pipette gun, digestion Colorimetric integrated tube detection, Sensitivity up to 0.001mg/L, with power-off protection function.

Detect the fluoride content, the range is 0.02mg/L-10mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the HJ488-2009 standard.

Detect the content of silica, the range is 0.1mg/L-5mg/L (segmented measurement), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Silicon Molybdenum Blue Colorimetry" standard.

Detect the nitrite content, the range is 0.002mg/L-1mg/L (segmented determination), no digestion is required, and the digestion Colorimetric integrated detection is used, which conforms to the GB7493-87 standard.

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Detect the content of volatile phenols, the range is 0.1mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ503-2009 standard.