Tensile Machine

Force measuring range of 5kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

The test force is 300 N, and the displacement rate adjustment range is 1~ 500mm/min. It is suitable for the measurement of tensile strength, fracture elongation, resilience modulus of various Plastic films and composite films, and can also perform performance tests such as disbonding, tearing, and heat sealing strength.

Maximum test force 100KN, Measurement range 1% - 100% FS (full scale), test force accuracy +/- 1%, displacement measurement resolution 0.01mm, beam traverse speed 0.1-500 mm/min.

Force range of 20kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

The test force range is 0~1000N, the stroke is 800mm, the touch LCD, the measurement range is 2%~ 100% of the maximum test force, the accuracy is better than the indication +/- 1%, and the tensile strength test can be realized.

Range 30N, load Graduation 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

Range 200N, load Graduation 0.01N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

Capacity 0~10kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Range 300KG, Measurement accuracy +/- 0.01N, built-in micro printer, resolution 1/200000, suitable for plastic sheet, pipe, profile, Plastic film and rubber, Wire and cable.

Maximum test force 10KN, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), test force error of indication indication within 0.5%, Displacement resolution 0.01mm, displacement rate adjustment range 0.01~ 500mm/min.

Control system adopts full digital control Frequency AC motor to ensure high transmission efficiency, smooth transmission, low noise, speed accuracy can be controlled within +/- 0.5%, the product performance is stable and reliable, Measuring accuracy is high, testing software is powerful, easy to understand.

Range 300N; 30Kg, load Graduation 0.1N; 0.01Kg; 0.01lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; Displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm, Test space 260mm.

Range 2000N200Kg, load Graduation 1N0.1Kg0.1lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm.

Maximum test force 50KN, Measurement range 1% - 100% FS (full scale), test force accuracy +/- 1%, displacement measurement resolution 0.01mm, beam traverse speed 0.1-500 mm/min.

Range 10KN; 1000KG, load Graduation 0.1 N 0.01kg 0.01lb, deformation resolution 0.001mm.

Range 500N, load resolution 0.1N, accuracy class 0.5, force value error of indication ≤ +/- 0.5%, force holding time 0-999.9 seconds (can be freely set), displacement stroke 38mm, displacement resolution 0.1mm, displacement error of indication ≤ +/- 0.1mm.

Tension gauge 30kg, in line with 16CFR, 1500.51-53, ASTM WK4510 PS79-96, ASTMF963, EN71-Part, M & S P115A standards, can detect clothing, toys and footwear after the installation of Accessories adhesion strength, loosening caused sharp edge, sharp angle and other mechanical damage.

Range 300N; 30Kg, load Graduation 0.1N0.01Kg0.01lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm.

Range 50KN; 5000KG, load Graduation 0.1 N 0.01kg 0.01lb, deformation resolution 0.001mm.

Range 3000N, load resolution 0.5N, accuracy class 0.5, force value error of indication ≤ +/- 0.5%, force holding time 0-999.9 seconds (can be freely set), displacement stroke 38mm, displacement resolution 0.1mm, displacement error of indication ≤ +/- 0.1mm.

Range 10N, load Graduation 0.0001N, Test space 220mm, 7-inch touch screen, Graduation can be set freely, with its own micro printer, in line with JB/T7796-2017 standard.

Range 100N; 10Kg, load Graduation 0.01N0.001Kg0.01lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm.