Tensile Machine

Force range of 10kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Capacity 5T, force measurement accuracy +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S., can be used to test tensile, compression, bending, shearing, disbonding, tearing and other mechanical properties.

Capacity 0~3kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Adopt ball screw drive and high-end stepper motor, equipped with large screen touch display, real-time display of test data, and support printing tensile strength, elongation and other results. Built-in micro-printer, with automatic reset, data memory and overload protection functions.

Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Maximum test force 5000N, test force level 1, test force Measurement range 2% --100% FS, beam displacement Measurement accuracy resolution higher than 0.01mm, Test speed range 0.1-500mm/min, stepless speed regulation.

Maximum test force 50KN, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), deformation Measurement range 0.2%~ 100% FS, deformation error of indication indication within +/- 0.5%, Displacement resolution 0.01mm.

Maximum test force 5000N, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), deformation Measurement range 0.2%~ 100% FS, deformation error of indication indication within +/- 0.5%.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. LCD real-time display, touch key operation, support Linear dispersion analysis and various test modes. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

Maximum test force 100KN, accuracy class 0.5, test error of indication indication within 0.5%, deformation Measurement range 0.2%~ 100% FS, Displacement resolution 0.01mm.

Range 50N, load Graduation 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

The force range is 10~500N, and the test stroke is 350mm, which can measure tensile compression, bending disbonding, displacement, tearing, insertion force, tensile damage force and other tests.

Stroke 1000mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force accuracy is better than +/- 1%, test force 1000N.

The pointer push-pull force meter is used to display the force value with the pointer scale and then observe and read it. The force value measurement range is 10~500N, and the effective stroke is 350mm.

Range 500N, load Graduation 0.01N, 7-inch touch screen, high-precision, high resolution, high Stability, in line with JB/T7796-2017 standard, with its own micro printer.

Maximum test force 5000N, accuracy class 0.5, Measurement range 1%~ 100% FS (full scale), Measurement range 0.2%~ 100% FS, Displacement resolution 0.01mm.

Capacity selection 500kg, force measurement Precision +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S, deformation indication Precision +/- 0.5%, Test speed range 50~300mm/min (can be arbitrarily set), test maximum stroke effective 500mm, effective Test space left and right 380mm, front and rear < unk >

The test force range is 0~2000N, the stroke is 800mm, the touch LCD, the measurement range is 2%~ 100% of the maximum test force, the accuracy is better than the indication +/- 1%, and the tensile strength test can be realized.

Stroke 600mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force Precision is better than +/- 1%, test force 1000N.

Touch LCD, using high-precision system, with digital display of test force, can realize the adjustment of the speed of the beam when the sample is clamped, the test force accuracy is better than +/- 1%, and the test stroke is 1000mm.

Capacity 200Kg, Load analysis 1/10000, Precision < 0.5%, Support a variety of force unit conversion, Suitable for a variety of material testing needs.

Support tensile, heat sealing, disbonding, tearing and other items. With touch operation, real-time LCD display, stepless speed regulation function, high control accuracy, provide test data Linear dispersion.