Miscellaneous instruments

The ink injection amount is 0.0012g, and the size is 20x180mm.

Detection distance 2.5inch/50mm, can detect metal size 5 * 5 * 1mm aluminum block, detection Frequency 82kHz, LED light alarm prompt, sound alarm prompt > 75dB, using a coil with AC passing through to generate a rapidly changing magnetic field. This magnetic field can induce eddy currents inside metal objects, and eddy currents will generate magnetic fields, which in turn affect the original magnetic field and cause the Detector to emit a sound.

Photoelectric Measurement range 2.5-9999 9r/min, contact measurement 0.5-1999 9r/min, with automatic memory MAX Maximum, MIN Minimum and last Measured value functions, lightweight and sturdy construction.

The use of diamond sanding needles can level the surface of the grinding wheel and improve the utilization rate; the stepless speed regulation of abrasive wheels is 500~1450 r/min, which can adapt to the needs of grinding different materials. It is equipped with stainless steel settling filtrate drawers for easy cleaning.

The instrument suitable for testing the Carr Angle of Repose of powder is used to determine the Carr Angle of Repose of dust by the injection-limited bottom surface method, which meets the requirements of GB/T 16913-2008/GB, GT /T 31057.3-2018.

Power 95W, test rate 10-60 times/min adjustable, 6 stations at the same time, suitable for power line, DC line bending test.

Special sealing material is used to improve light protection, and the detection accuracy reaches 1X10 ^ (-16) mol ATP. The integrated box design is easy to carry, and the bottom detection design ensures data Stability.

Amplitude 30 +/- 2mm, Vibration Frequency 2-3Hz, 99999 cycles can be tested, load-bearing up to 20KG, to meet the fatigue performance testing requirements of plastic bags.

The speed adjustment range is 5 to 60 times/minute, and the stroke adjustment range is 0 to 5cm. The speed stroke of a variety of connector insertion and unplugging testing machines can be adjusted, and the speed value is displayed.

Rotation speed 1400 r/min, equipped with diamond sanding needles can improve the utilization rate of abrasive wheels, and has a water supply system to facilitate wet grinding.

Measurement range 200mA to 200A AC current, accuracy +/- (2.5% + 8d), CAT III 600V compliant safety standard, equipped with φ 30mm large jaw and automatic shutdown function.

Output signal 125kHz, LCD display, with function display and bar chart, grid Voltage identification about 0~ 0.4m.

The diameter of the countertop is 800mm, and the countertop is made of high-quality lame plating steel plate material, with an angle range of 0-30 ° and a bearing capacity of 80kg.

Measurement range 2.5-9999 9r/min, photoelectric contact dual-use design, automatic memory MAX Maximum, MIN Minimum and final Measured value ， +/- 0.05% high-precision, 1 second fast sampling, sturdy and portable.

Measurement range of springback coefficient is 25% -80%, springback accuracy of falling ball is less than 1.5%, and the average springback height and springback rate are automatically calculated, which conforms to multinational standards.

WZY-4030 numerical control universal prototype adopts the latest numerical control technology, controls the three-axis linkage system through the program controller, drives the XYZ axis motor and is supplemented by the high-speed spindle motor to form a high-accuracy milling machine system, and realizes the spline cutting of Non-metallic plates., Dumbbell sample milling, Impact notch milling functions. With complete-built unit protective cover, 1 vacuum cleaner

Maximum dehydrate mass 200g, rotational speed 2800r/min, dehydrate time 0.5-30 min adjustable, suitable for slurry concentration determination and sampling.

Imported Platinum Rhodium Alloy Sensors, imported Balance and Balance comes with internal calibrating function