Miscellaneous instruments

The maximum height of the plastic test piece is 50~500mm, and the radius of the impact head is 1/4, 3/16, 1/8, 1/16in. The standard meets the requirements of JIS-K5600 (Coating), ASTM-D2794, JIS-K5400 and other standards.

Test products 3, 8-bit counter, with power-down memory function, Test speed 0-300 times/minute, hit switch touchpoint force 0-500gf adjustable.

Drop height 0-2000mm adjustable, drop ball control mode for DC electromagnetic control, in line with JIS-K6745, A5430 test standards.

The diameter of the countertop is 1000mm, and the countertop is made of high-quality lame plating steel plate material, with an angle range of 0-30 ° and a bearing capacity of 120kg.

Computer automatic control stroke, XY stroke 400x300mm, 460 × 360mm Glass table, all marble structure, with adjustable LED ring surface Light source.

Used for a variety of battery short circuit test, using PLC automatic control, applicable to a variety of industry standards, simulating battery external short circuit, recording battery Voltage, current and surface temperature changes, Temperature range at room temperature~ 150 ℃.

Manual operation, XY stroke 200x100mm, 270x160mm Glass table, digital measurement, all marble construction, with adjustable LED annular surface Light source.

Compliant with the American SAMSONITE standard, spring-loaded 7.9kg/mm vibration, LCD digital display, used to test the suitcase handle, sewing line and overall structure.

Intelligent low temperature thermostatic device

Degree of automation is high, in line with the national bright high temperature propeller, using the measuring rod positioning measurement, flow measurement error ≤ 1.5%.

Speed range FM-100V10 (0.01-10 m/s), flow measurement error ≤ 1.5%, LCD display, Measurement mode, rod positioning measurement

Measurement range of ground Voltage 0~200V, ground Voltage error +/- 2% +/- 5dgt, resolution 0.1V, ground resistance Measurement range 20 Ω: 0~19.99 Ω; 200 Ω: 2~ 199.9 Ω; 2000 Ω: 20~1999 Ω, ground resolution 0.01 Ω~ 1 Ω, used for the measurement of ground resistance of various devices and the measurement of conductor resistance value and ground Voltage of low resistance.

New fully enclosed Ceramics furnace body design structure, more high temperature resistance

In line with the national bright high temperature rotor, suitable for open channel Flow velocity Flow rate measurement in the field, matching Hall Flow velocity swirl/spin Sensors, can measure polluted turbid water flow.

Detection Range 1.8m (50cm * 50cm * 1.2cm Aluminum Panel), Detection Frequency 7.2kHz, Black Nonferrous Metals Identification, Working time 6-10 hours, LCD display/sound prompt mode, specially used to detect buried metal objects in the ground.

Imported alloy Sensors, new fully enclosed metal furnace body design structure greatly improves sensitivity and stability

Cone penetration (25 ℃, 150g) 1/10mm200~315, ph value 6~ 8, drop point (℃) ≥ 200, evaporation loss (99 ℃, 22h) % ≤ 1.5, volume resistivity (20 ℃, Ω cm) ≥ 108.

Adopt double station, rubber hardness Hs80 +/- 5 (Shore A type), roller load 2000g +/- 5g, thickness of about 6mm, used for adhesive tape peeling strength, holding tack and other test specimens.

Power 550W (250W2 IR bulb), fast drying sample, suitable for laboratory environment.

Four experimental stations, test fixture routine clamping range 60 × 70mm, Test speed 5~ 60 times/min, LCD display speed