Miscellaneous instruments

The diameter of the scraping needle is 0.45mm, the material meets the requirements of GB/T4358, the scraping speed is adjustable from 10 to 60 times/minute (one back and forth movement is once), and it has a self-determined stop function. When the scraping needle wears through the insulation and contacts the conductor, it will automatically stop.

Applicable to plastics, ceramics, acrylic, fiberglass and other materials and test the fastness of Coatings, in line with JIS-K5600 (Coating), ASTM-D2794, JIS-K5400 and other standards.

Cutting range 0.05mm2 to 50.00mm2, speed 2800rpm, power 40W, sanding speed 1400rpm/min, grinding disc diameter 120mm, Z fine-tuning range can be automatically set, magnification 0.7X/1X/1.5X/2.0X/2.5X/3.0X/3.5X/4.0X/4.5X, gear fixed times 0.7~ 4.5.

With 6 test stations, experimental angle 0~ +/- 180 °, Test speed 5-60 times/min (knob speed regulation, LCD display), equipped with six sets of anti-skid, not easy to damage the sample special fixture,

Test the collision resistance of the battery, in line with GB, QC standards, the maximum travel 1000mm, Impact height 610mm, accuracy +/- 0.1, resolution 1/100.

Force value range 1~ 20kN, force measurement accuracy 0.1N, unit conversion kg, N, lb, extrusion stroke 200mm or 300mm, force value display PLC touch screen display, battery extrusion head standard extrusion head, area ≥ 20cm ², extrusion degree Extrusion pressure reaches 13 +/- 0.2kN, keep 1min., box material Inner box stainless steel, outer box Cold rolled steel plate spray treatment.

Made of stainless steel, it is mainly used for heat resistance testing of household and similar plug and socket products. It is the equipment required by the relevant manufacturers and Quality control departments for product mass inspection and control.

Piece pole piece feeding, can be used in the glove box, four guide post structure, no burrs, powder, indentation and other mass defects, punching accuracy +/- 0.1mm, the maximum punching size 100mmx140mm.

Click and scribe can be tested separately, independent operation, Test speed 0~80 times/minute, using multi-function clamping mode and LED digital display setting counter intuitive control, simple operation.

Test station 1 station, Test speed 5~ 30 times/min, SMC cylinder, high elastic rubber indenter.

Manual operation, XY stroke 400x300mm, 460 × 360mm Glass table, digital measurement, all marble structure, with adjustable LED annular surface Light source.

The electrode cross-sectional area is 2mm × 5mm two rectangular platinum electrodes, one end edge is 30 ° inclined surface, the test Voltage is 100~600V, the dripping time interval can be set arbitrarily, in line with GB/T4207 test standard.

Manual operation, XY stroke 500x400mm, 560 × 460mm Glass table, digital measurement, all marble construction, with adjustable LED annular surface Light source.

Impedance steel ball test method, total weight 135 +/- 5g, test displacement 30 +/- 1 °, automatic detection of penetration and shutdown, in line with ASTM-D2099 standard.

In line with the SAMSONITE standard, the test piece will automatically stop when it falls in the middle of the transportation function, and the Test speed can be adjusted from 0-5km/h, which is suitable for luggage or travel bags with wheels.

For the life test of luggage handle, it conforms to the QB/T 1586.3 standard, the lifting height is adjustable from 0 to 300mm, the Test speed is 30 times/min, and it has the function of power failure memory.

Microcomputer automatic control, drop hammer and puncture hammer free replacement, the bottom is equipped with a level test device, using the form of free fall.

Impact height 0~ 150mm adjustable, test speed adjustable (0~ 40) cpm, oscillation times 1~ 999999 adjustable, with automatic recording and memory functions.

Made of high-strength aluminum alloy, the test position can adjust the test stroke, the tensile speed is 0~30cm/sec, and the reciprocating fatigue test is done for the tie rod of the bag.