Conductivity Meter

Measurement range 0~2X100000 μs/cm, measurement error +/- 1.5% F.S, temperature compensation range 15~ 35 ℃, power supply AC220 +/- 10%, 50Hz, electrode constant specifications 0.01, 0.1, 1, 10, recording output (0~20) mV, Power consumption 5w.

Conductivity range 10~1999 µS/cm, Measurement accuracy +/- 1% F.S., platinum Conductivity Detector electrode, automatic temperature compensation.

8 range automatic frequency conversion, automatic range switching, with 1.0 constant electrode, can cover full range measurement, multiparameter measurement, conductivity, resistivity, TDS, temperature, support reference temperature, temperature coefficient, TDS coefficient adjustable.

Economic, 1.5 grade, conductivity Measurement range 0.00μS/cm~ 200.0mS/cm, conductivity minimum resolution 0.01μS/cm, conductivity intrinsic error +/- 1.5% F.S, Temperature Measurement range (0.0~100.0) ℃, temperature coefficient 2%/℃, temperature compensation range (0.0~50.0) ℃ Manual

Level 0.5, conductivity Measurement range 0.000μS/cm~ 200.0mS/cm, Measurement mode, measurement of solution conductivity, resistivity, temperature value, automatic storage instrument calibrated data, and a key calibration, built-in 3 calibrated points, Automatic calibration electrode constant.

Economic Industrial Online Conductivity Meter, with TDS Measurement mode, 3-point button calibrated, 4 to 20mA signal output, the instrument is suitable for chemical, metallurgy, environmental protection, and food industries to monitor the conductivity and solubility of water quality.

● 1 to 3 point button calibrate ● Automatic temperature compensation ● Optional electrode constant, calibrate point, temperature coefficient ● Automatic end point lock, automatic shutdown, automatic meter reset ● conductivity range: 0.01~ 20mS/cm, accuracy : +/- 1% F.S

Measurement accuracy: 0.01µS/cm~ 20.00mS/cm. Conductivity Detector standard solution, automatic temperature compensation and electrode diagnosis. Measurement accuracy +/- 0.5%.

Volume range 0~200000 μs/cm, measurement error +/- 1.5% F.S., suitable for production processes and wastewater treatment in many industries such as water plants, power plants, paper mills, food and metallurgy.

Level 1.0, 0.00μS/cm~ 200mS/cm, +/- 1.0% FS, TDS range 0.00mg/L~ 100g/L, high definition liquid crystal display, button operation, standard composite Conductivity Detector electrode, electrode holder, dust cover

Automatic identification conductivity standard solution, support 1 point calibrate, support electrode constant setting, 0.01, 0.1, 1.0, 10 four electrode constants optional; support 200 sets of Data storage, automatic determination of the end point.