Densitometer

Range 0.005~ 300g, 0.001g/cm3 accuracy; solid liquid dual-use; with RS232C interface; with Wind Shield, temperature compensation can be set, in line with a variety of standards.

Suitable for rubber, plastic, metal, Ceramics and other materials. With rapid testing, automatic zero tracking, temperature compensation and other functions, support multiple measurements on site, and use corrosion-resistant high-mass accessories

The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.

Adopt Archimedes principle buoyancy method to accurately read the measured value directly. Weighing range 0.005~ 600g, Density accuracy 0.001g/cm ³, data interface RS232C,

Suitable for rubber, plastic, metal, Ceramics and other materials. It is easy to operate, with rapid testing, automatic zero tracking, temperature compensation and other functions, suitable for multiple measurements on site

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

Using 7 inch wireless touch screen, combined with Archimedes principle, accurate measurement of various liquid Density, accuracy of 0.001g/cm ³. With dynamic measurement function, support real-time update Density value, suitable for a variety of liquids (including viscous, volatile, corrosive liquids, etc.).

Using Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors, 5-inch touch screen, supports intelligent pinyin input, automatic storage of 100 sets of data, Density upper and lower limit determination and a variety of printing methods, accurate and efficient measurement, suitable for a variety of irregular solid, particle and floating body Density test.

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

Weighing range 0.005g-300g, weighing accuracy 0.005g, Measurement range 0.001-99.999g/cm3, density accuracy 0.001g/cm3, specific gravity range > 1, < 1 can be tested, solution compensation setting can be freely set.

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

Density resolution 0.001 g/cm3, maximum weight 600g, minimum weight 0.005g, Measurement range 0.001 - 99.999g/cm3, equipped with integrally formed aluminum alloy measurement table and transparent sink.