Densitometer

Using German HBM imported Sensors, better measurement repeatability, two steps to directly read any solid, particle, floating material Density, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel cable, no bending and deformation, vertical with the hanging railing does not touch the sink, can determine the main material content%.

Using the Archimedes principle, it has the function of high accuracy and fast measurement of solid and liquid Density. It is easy to operate, stable and durable, and is equipped with a large-capacity sink to support multiple continuous tests.

Density volume of solid, granular, thin film and floating body can be measured, the measurement range is 0.01g~ 300g, and the Density accuracy is 0.001g/cm3. Density value can be displayed in only two steps with water as medium.

Can quickly and accurately determine the fineness, purity and gold K number of precious metals, easy to operate and no trace pollution. With temperature compensation, mixed specific gravity measurement function, corrosion-resistant transparent sink design, support connection with computers and printers

Range 0.005~ 300g, 0.001g/cm3 accuracy; solid liquid dual-use; with RS232C interface; with Wind Shield, temperature compensation can be set, in line with a variety of standards.

Compared with the traditional Wechsler Balance method and Density Cup method, the operation is simpler, and it is not affected by external factors and temperature, so as to achieve fast and accurate measurement, which is suitable for applications such as quality management, formula development, and cost control.

Quick, accurate determination of gold purity, K-value and Density, easy to operate and non-polluting, suitable for testing a wide range of precious metals. It supports wide K-number ranges and mixed specific gravity determination, with special software design and large sink design

The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.

Weighing range 0.005~ 300g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value.

Sensors imported from German HBM, Weighing range 0.001~ 300g, Density accuracy 0.0001g/cm ³, Density measurement range 0.0001~ 99.9999g/cm ³, test time about 5 seconds, measurement types Solid, granular, film, floating body, the results show Density, volume

Weighing range 0.01~ 300g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value.

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

Using 7 inch wireless touch screen, combined with Archimedes principle, accurate measurement of various liquid Density, accuracy of 0.001g/cm ³. With dynamic measurement function, support real-time update Density value, suitable for a variety of liquids (including viscous, volatile, corrosive liquids, etc.).

Weighing 310g, weighing accuracy 0.01g, Density accuracy 0.01g/cm ³, pan size 60x152mm, LCD liquid crystal display, optional Density rack.

Sample weight range 0.01g~ 300g, Sample Density accuracy 0.001 g/cm3, test type, high viscosity liquid, ordinary liquid, test result specific gravity Baume degree, test time 10 seconds

Using Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors, 5-inch touch screen, supports intelligent pinyin input, automatic storage of 100 sets of data, Density upper and lower limit determination and a variety of printing methods, accurate and efficient measurement, suitable for a variety of irregular solid, particle and floating body Density test.

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

The Weighing range is 0.01g-300g, the weighing accuracy is 0.01g, the density accuracy is 0.001g/cm3, the specific gravity range is > 1, < 1 can be tested, and the solution compensation setting can be freely set.

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

High accuracy German HBM Sensors, measurement accuracy of 0.0001 g/cm ³, combined with 32-bit ARM processor, to achieve fast and stable measurement. Equipped with 5-inch touch screen, intelligent pinyin input, automatic storage of 100 sets of data, and support for a variety of printing methods

Weighing range 300g, Readability 0.01g, Linearity +/- 0.02g, Repeatability Error +/- 0.01g, Dimension 190 * 250 * 250mm, Packaging Dimensions 560 * 300 * 210mm, support standard weight volume calibration.

Weighing range 300g, Readability 1mg, Repeatability Error +/- 1mg, Linearity +/- 2mg, test weight value 300g, calibrated type external calibrated