Brand：
$458.00
SE
XIONGFA MDJ-300M solid-liquid dual-use Density Meter measurement range 0.005~ 300g
Solids, Granules, Films, Floats, Liquids0.005~300g0.001~99.999g/cm³
Range 0.005~ 300g, 0.001g/cm3 accuracy; solid liquid dual-use; with RS232C interface; with Wind Shield, temperature compensation can be set, in line with a variety of standards.
$438.00
SE
XIONGFA XF-300K gold purity Tester, Weighing range 0.005~ 300g
0.001~300g
Quick, accurate determination of gold purity, K-value and Density, easy to operate and non-polluting, suitable for testing a wide range of precious metals. It supports wide K-number ranges and mixed specific gravity determination, with special software design and large sink design
$417.00
SE
XIONGFA MDJ-300S Solid Density Meter weight range 0.005~ 300g
0.005~300g
The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.
$417.00
SE
XIONGFA XF-300L Liquid Density Meter Buoyancy Method, Water Replacement Method 0.005~ 300g
0.005~300g0.001~2.200g/cm³
Weighing range 0.005~ 300g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value.
$517.00
SE
XIONGFA XF-300S Solid Density Meter Liquid Density Scale 0.001g~ 300g
Solids, Granules, Films, Floats0.001~300g0.0001~99.9999g/cm³0.0001~99.9999g/cm³
Sensors imported from German HBM, Weighing range 0.001~ 300g, Density accuracy 0.0001g/cm ³, Density measurement range 0.0001~ 99.9999g/cm ³, test time about 5 seconds, measurement types Solid, granular, film, floating body, the results show Density, volume
$601.00
SE
FANGRUI Instrument ZMD-1 Electronic Density Meter density range 0~300g/cm3
0~300g0~300g/cm³
$475.00
SE
XINGYUN JA303M-G Gold Density Scale 310g/0.005g
Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.
$517.00
SE
XIONGFA XFMD-3205L Touch Screen High-end Liquid Density Meter 300g/0.001g/cm3
0.005~300gDensity > 1, < 1 can be tested
Using 7 inch wireless touch screen, combined with Archimedes principle, accurate measurement of various liquid Density, accuracy of 0.001g/cm ³. With dynamic measurement function, support real-time update Density value, suitable for a variety of liquids (including viscous, volatile, corrosive liquids, etc.).
$475.00
SE
XINGYUN JA303M-L Liquid Density Scale 310g/0.005g
Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, pan size Φ50mm top plate, direct display of sample Density, built-in multiple Density references.
$476.00
SE
XIONGFA XFCNMD-3005S Hot-selling Solid Density Meter 0.005-300g
Any irregular solid, particle, float can be measured0.005-300g
Using Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors, 5-inch touch screen, supports intelligent pinyin input, automatic storage of 100 sets of data, Density upper and lower limit determination and a variety of printing methods, accurate and efficient measurement, suitable for a variety of irregular solid, particle and floating body Density test.
$475.00
SE
XINGYUN JA303M-A water-absorption Density Scale 310g/0.005g
Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.
$475.00
SE
XINGYUN JA303M-S Solid Density Scale 310g/0.005g
Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.
$677.00
SE
XIONGFA XFCNMD-3203S Precision Solid Density Meter 0.001-300g
Any irregular solid, particle, float can be measured0.001-300g
High accuracy German HBM Sensors, measurement accuracy of 0.0001 g/cm ³, combined with 32-bit ARM processor, to achieve fast and stable measurement. Equipped with 5-inch touch screen, intelligent pinyin input, automatic storage of 100 sets of data, and support for a variety of printing methods
$655.00
SE
SDPTOP JA3003J Electronic Density Balance Maximum weight 300g
300g
Weighing range 300g, Readability 1mg, Repeatability Error +/- 1mg, Linearity +/- 2mg, test weight value 300g, calibrated type external calibrated
If you don't know how to choose "Densitometer", please consult customer service.