Gas detector

General catalytic combustion Sensors, catalytic combustion detection principle and MCU low power chip, support a variety of signal output (4-20mA, RS485, wireless transmission) and remote data monitoring.

Conventional, leak detection, intelligent sensor and MCU chip technology, support a variety of signal output methods (such as 4-20mA, RS485, switching value), with explosion protection function (Ex db IIC T6 Gb).

Leak detection, not suitable for long-term ammonia occasions, using high Sensitivity intelligent sensing technology, support custom range and a variety of Output signals, wireless modules (such as 4G, LORA) to achieve remote data transmission.

For oil refineries, it detects four gases: benzene, toluene, Xylene, and combustible gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, supports customized wireless signal transmission, and can be operated by remote control without opening the lid.

UV detection principle, long life high-precision, flow-through measurement, low power MCU chip and intelligent Sensors, explosion-proof (d) design meets international safety standards for explosive environments.

Type Industrial grade real-time online monitoring type, Operating Mode Fixed continuous online work, pump suction detection (positive pressure, negative pressure, vacuum and other environments), detection error ≤ +/- 3% F. S (full scale ≤ 3%) Higher accuracy can be customized, Repeatability ≤ +/- %, Linearity ≤ +/- 1%

Using advanced infrared NDIR technology, Measurement range is 0-100ppm, with a variety of signal output (such as 4-20mA, RS485, switching, etc.), remote data monitoring, long life (2-3 years) Sensors.

Conventional, leak detection, optional PID, High Sensitivity Intelligent Sensors and low power consumption MCU chip, support a variety of signal output, equipped with high definition LCD screen, remote control without opening the lid operation and integrated sound and light alarm function.

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, MCU chip and intelligent Sensors technology, the device supports a variety of Output signals to achieve remote monitoring and data recording.

High-precision Intelligent Sensors and low-power MCU chip design, resolution up to 0.01ppm, remote data monitoring and alarm, high definition LCD screen supports Chinese and English interface switching.

Thermal options, for detecting methane, oxygen, carbon monoxide, hydrogen sulfide four gases, support custom wireless signal transmission, dot matrix high definition LCDTFT LCD display, local integrated sound and light alarm indication, Protection level IP66.

Conventional, leak measurement, multiple signal output methods (4-20mA, RS485, wireless transmission) and high definition LCD display, support remote monitoring and sound and light alarm, explosion-proof design (Ex db IIC T6 Gb)

Conventional, optional PID high performance, supports a variety of signal output methods (such as 4-20mA, RS485, switching), wireless signal transmission (such as LORA, 4G, WiFi, etc.), remote data transmission and alarm reminders.

Conventional, optional PID high performance with 0-50ppm high-precision detection range, resolution up to 0.01ppm, low power MCU chip and modular design, remote data monitoring and alarm.

Intelligent Sensors and MCU chip design, support 4-20mA, RS485, switch and other signal output, equipped with high definition LCD display, support Chinese and English Operating interface.

For chemical plants, detecting carbon monoxide, hydrogen sulfide, oxygen, flammable gases, diffusion mode of operation, explosion proof certificate level Ex db IIC T6 Gb, local integrated sound and light alarm indication, support custom wireless signal transmission.

Industrial grade 6 years anti-interference, pipe complex environment oxygen measurement, low power consumption MCU chip and high sensitive intelligent Sensors, accurate monitoring of 0-5% oxygen concentration, on-site sound and light alarm and remote monitoring function.

Wastewater treatment plant, can detect hydrogen sulfide, ammonia, oxygen, combustible gas four kinds of gas, a variety of ranges can be selected, explosion-proof certificate level Ex db IIC T6 Gb, local integrated sound and light alarm indication, support custom wireless signal transmission, can be operated by remote control without opening the lid of the Detector.

Food processing plant, can detect carbon dioxide, nitrogen, oxygen, gas four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support customized wireless signal transmission, can be operated by remote control without opening the lid.

Infrared NDIR detection principle, 1% high-precision, service life of 10 years, R507 consists of R125 pentafluoroethane and R143A trifluoroethane, detection range 0-1000ppm, standard configuration two-stage alarm.

For automobile manufacturers, it can detect formaldehyde, benzene, toluene, Xylene four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support customized wireless signal transmission, and can operate the Detector by remote control without opening the lid.

Detect the concentration of tetrafluoropropylene gas, the range is 0-1000ppm, the principle of infrared NDIR detection, 1% high-precision, the service life of Sensors is 10 years, and the conventional high-low alarms and interval control alarms can be set.

Detect methyl ethyl ketone C4H8O gas concentration, range 0-2% Vol, infrared NDIR detection principle, 1% high-precision, Sensors service life of 10 years, using dot matrix high definition LCDTFT LCD screen, support custom wireless signal transmission.

Detect odor concentration, the range is 0~5ppm, Electrochemical sensor principle, suitable for garbage stations, sewage treatment stations, public toilets and other air detection.