Gas detector

General catalytic combustion Sensors, catalytic combustion detection principle and MCU low power chip, support a variety of signal output (4-20mA, RS485, wireless transmission) and remote data monitoring.

Conventional, leak detection, intelligent sensor and MCU chip technology, support a variety of signal output methods (such as 4-20mA, RS485, switching value), with explosion protection function (Ex db IIC T6 Gb).

Detect R134a gas concentration, commonly known as tetrafluoroethane, detection range 0-1000ppm, infrared NDIR detection principle, 1% high-precision, service life of 10 years, with local integrated sound and light alarm indication function.

Type Industrial grade real-time online monitoring type, Operating Mode Fixed continuous online work, pump suction detection (positive pressure, negative pressure, vacuum and other environments), detection error ≤ +/- 3% F. S (full scale ≤ 3%) Higher accuracy can be customized, Repeatability ≤ +/- %, Linearity ≤ +/- 1%

Conventional, leak detection, optional PID, High Sensitivity Intelligent Sensors and low power consumption MCU chip, support a variety of signal output, equipped with high definition LCD screen, remote control without opening the lid operation and integrated sound and light alarm function.

Conventional, optional PID, supports a variety of signal output methods (4-20mA, RS485, switch), wireless signal transmission functions (such as LORA, 4G, WiFi, etc.), remote data transmission and alarm notification.

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, MCU chip and intelligent Sensors technology, the device supports a variety of Output signals to achieve remote monitoring and data recording.

High-precision Intelligent Sensors and low-power MCU chip design, resolution up to 0.01ppm, remote data monitoring and alarm, high definition LCD screen supports Chinese and English interface switching.

For coal mines, the detection of gas (methane), carbon monoxide, oxygen, carbon dioxide four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support for customized wireless signal transmission, and can be operated by remote control without opening the lid.

Conventional, optional PID high performance, supports a variety of signal output methods (such as 4-20mA, RS485, switching), wireless signal transmission (such as LORA, 4G, WiFi, etc.), remote data transmission and alarm reminders.

Conventional, optional PID high performance with 0-50ppm high-precision detection range, resolution up to 0.01ppm, low power MCU chip and modular design, remote data monitoring and alarm.

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, low power MCU chip and intelligent Sensors technology, equipped with high definition LCDTFT display, support Chinese and English Operating interface switching.

Infrared NDIR detection principle, 1% high-precision, service life of 10 years, R507 consists of R125 pentafluoroethane and R143A trifluoroethane, detection range 0-1000ppm, standard configuration two-stage alarm.

PID optical ion high-precision, conventional, high-precision MCU chip, supports a variety of signal output (4-20mA, RS485, wireless communication), built-in sound and light alarm and wireless remote alarm to enhance security.

Detect the concentration of tetrafluoropropylene gas, the range is 0-1000ppm, the principle of infrared NDIR detection, 1% high-precision, the service life of Sensors is 10 years, and the conventional high-low alarms and interval control alarms can be set.

Detect methyl ethyl ketone C4H8O gas concentration, range 0-2% Vol, infrared NDIR detection principle, 1% high-precision, Sensors service life of 10 years, using dot matrix high definition LCDTFT LCD screen, support custom wireless signal transmission.

Infrared NDIR detection principle, 1% high-precision, Sensors life of 10 years, detection range of 0-8% Vol, resolution up to 0.001%, error less than 1%, remote data monitoring and alarm function.

For gas stations, it detects methane, ethane, propane, and combustible gases. Explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, supports customized wireless signal transmission, and can be operated by remote control without opening the lid.

Infrared NDIR detection principle, 1% high-precision, 10-year service life, R404a is made of HFC-125, HFC-134a and HFC-143, with a range of 0-1000ppm and an aluminum alloy cast explosion-proof shell.

Infrared NDIR detection principle, 1% high-precision, Sensors service life of 10 years, detection of isobutane C4H10 gas concentration, range 0-2% Vol, explosion-proof certificate grade Ex db IIC T6 Gb, passed a variety of safety international certifications

For metallurgical plants, it can detect four gases: sulfur dioxide, nitric oxide, oxygen, and combustible gases. The explosion-proof certificate level is Ex db IIC T6 Gb, and the local integrated sound and light alarm indicator supports customized wireless signal transmission. The Detector can be operated by remote control without opening the lid.

Infrared, high-precision, resolution 100ppm, 300ppm detection limit, support a variety of signal output (4-20mA, RS485, switching), wireless transmission (4G, WiFi, LORA, etc.), System integration and remote monitoring.

Leak detection, accuracy requirements are not high occasions, detection range of 0-10ppm (can be customized), resolution of 0.01ppm, accuracy error ≤ +/- 3%, Response time ≤ 30 seconds, explosion-proof aluminum alloy shell durable.

Conventional, leak detection, using intelligent Sensors technology and MCU chip, supports 4-20mA, RS485 and other signal interfaces, and supports remote operation and alarm.