Gas detector

Conventional, leak detection, optional PID, High Sensitivity Intelligent Sensors and low power consumption MCU chip, support a variety of signal output, equipped with high definition LCD screen, remote control without opening the lid operation and integrated sound and light alarm function.

CL2, range 0~10ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Conventional, optional PID, supports a variety of signal output methods (4-20mA, RS485, switch), wireless signal transmission functions (such as LORA, 4G, WiFi, etc.), remote data transmission and alarm notification.

H2, range 0~500ppm, resolution 0.1ppm, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%

Electrochemistry Sensors principle, detection of gas H2S, diffusion sampling, two-stage concentration alarm, flameproof design is suitable for dangerous conditions 1 and 2, and the range is 0~100ppm.

Electrochemistry principle, pump suction sampling, detection of ozone gas, range 0~1ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

O2, range 0~30% vol, resolution 0.1%, three alarm, temperature measurement

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, MCU chip and intelligent Sensors technology, the device supports a variety of Output signals to achieve remote monitoring and data recording.

H2S, range 0~50ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

CO2, range 350~9999ppm, resolution 5ppm, intrinsic error +/- (30PPM + 5% reading), response time~ 90s, recovery time < 120s, alarm mode sound and light

High-precision Intelligent Sensors and low-power MCU chip design, resolution up to 0.01ppm, remote data monitoring and alarm, high definition LCD screen supports Chinese and English interface switching.

Sensors principle Infrared, detecting gas carbon monoxide CO, range 0~1000ppm, sampling method flow type, resolution 0.1PPM, detection method flow type.

Sampling method, detection of CH2O formaldehyde gas, imported high-precision Sensors, USB can be charged anytime, anywhere, equipped with Filter, through explosion-proof certification.

Pump suction sampling, detection of nitrogen oxide gas, range 0-100PPM, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Original imported high-precision Sensors, detect N2 gas concentration, range 0-99.99% VOL, only suitable for testing pure nitrogen on site, resolution 0.01% vol, Sampling method pump suction.

Adopt 2.4 inch industrial grade color screen, can measure CO, H2S, O2, EX four kinds of gas, pump suction sampling, real-time detection, real-time storage, explosion-proof mark Ex ia ⅱ C T4 Ga.

O3, range 0~1ppm, resolution 0.001ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Pump suction sampling, detection of H2 concentration, range of 0-500PPM, Electrochemical sensor principle, with storage, data export, Temperature Humidity detection and other functions.

Detection gas EX/O2/C0/H2S, +/- 5% FS (combustible )、 +/- 10% (carbon monoxide ）、 +/- 5μmol/mol (hydrogen sulfide), Light Emitting Diode, sound, vibration indication alarm

0~30% vol, resolution 0.1% vol, diffusion sampling, highly waterproof design, Sensors fault self-check, Automatic calibration function, two-stage triple alarm, replaceable in-line module Sensors.

In line with GB3836 standard, built-in micro air pump, pump suction sampling, methane gas concentration detection range 0-1000PPM, 2.4 inch industrial grade color screen, high-precision Sensors.

CH4, range 0~1000ppm, resolution 1ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 1%, explosion-proof mark CNEx16.0547, Protection level IP65

Using Infrared Sensors to detect CO2 gas concentration, pump suction sampling, real-time detection and storage, Measurement range 0-500ppm, through explosion-proof certification.

Thermal options, for detecting methane, oxygen, carbon monoxide, hydrogen sulfide four gases, support custom wireless signal transmission, dot matrix high definition LCDTFT LCD display, local integrated sound and light alarm indication, Protection level IP66.