Gas detector

Can simultaneously test oxygen, carbon monoxide, hydrogen sulfide, combustible gas four gases, using diffusion sampling, optional pump, with sound and light shock alarm function.

O2, range 0~30% vol, resolution 0.01% vol, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Oxygen O2, range 0~25%, resolution 0.1%, intrinsic error ≤ +/- 1.5% F · S, response time ≤ 15s, recovery time ≤ 15s, alarm mode sound and light

Can simultaneously test O2, LEL, CO, H2S, optional external pump for pump sampling, with promotion alarm function.

O2, range 0~30% vol, resolution 0.1%, three alarm, temperature measurement

Adopt 2.4 inch industrial grade color screen, can measure CO, H2S, O2, EX four kinds of gas, pump suction sampling, real-time detection, real-time storage, explosion-proof mark Ex ia ⅱ C T4 Ga.

Detection gas EX/O2/C0/H2S, +/- 5% FS (combustible )、 +/- 10% (carbon monoxide ）、 +/- 5μmol/mol (hydrogen sulfide), Light Emitting Diode, sound, vibration indication alarm

0~30% vol, resolution 0.1% vol, diffusion sampling, highly waterproof design, Sensors fault self-check, Automatic calibration function, two-stage triple alarm, replaceable in-line module Sensors.

Simultaneously detect H2S, CO, O2, NO2 four gases, pump suction sampling, using imported electrochemistry gas Sensors, real-time detection, real-time storage, explosion-proof signs Ex ia ⅱ C T4 Ga.

For coal mines, the detection of gas (methane), carbon monoxide, oxygen, carbon dioxide four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support for customized wireless signal transmission, and can be operated by remote control without opening the lid.

Detect oxygen concentration, dust-proof design and water gas filtrate, equipped with dust Filter, built-in micro air pump, original imported high-precision Sensors, full software Automatic calibration, range 0-30% Vol.

Simultaneous detection of carbon monoxide, hydrogen sulfide, oxygen, built-in 4000mA large capacity polymer rechargeable battery, detection accuracy ≤ +/- 3%, Linearity ≤ +/- 1%, Sampling method pump suction.

For chemical plants, detecting carbon monoxide, hydrogen sulfide, oxygen, flammable gases, diffusion mode of operation, explosion proof certificate level Ex db IIC T6 Gb, local integrated sound and light alarm indication, support custom wireless signal transmission.

Industrial grade 6 years anti-interference, pipe complex environment oxygen measurement, low power consumption MCU chip and high sensitive intelligent Sensors, accurate monitoring of 0-5% oxygen concentration, on-site sound and light alarm and remote monitoring function.