Gas detector

Conventional, leak detection, intelligent sensor and MCU chip technology, support a variety of signal output methods (such as 4-20mA, RS485, switching value), with explosion protection function (Ex db IIC T6 Gb).

For oil refineries, it detects four gases: benzene, toluene, Xylene, and combustible gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, supports customized wireless signal transmission, and can be operated by remote control without opening the lid.

UV detection principle, long life high-precision, flow-through measurement, low power MCU chip and intelligent Sensors, explosion-proof (d) design meets international safety standards for explosive environments.

NOX, range 0~100ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Type Industrial grade real-time online monitoring type, Operating Mode Fixed continuous online work, pump suction detection (positive pressure, negative pressure, vacuum and other environments), detection error ≤ +/- 3% F. S (full scale ≤ 3%) Higher accuracy can be customized, Repeatability ≤ +/- %, Linearity ≤ +/- 1%

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, MCU chip and intelligent Sensors technology, the device supports a variety of Output signals to achieve remote monitoring and data recording.

CH4, range 0~1000ppm, resolution 1ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 1%, explosion-proof mark CNEx16.0547, Protection level IP65

Conventional, leak measurement, multiple signal output methods (4-20mA, RS485, wireless transmission) and high definition LCD display, support remote monitoring and sound and light alarm, explosion-proof design (Ex db IIC T6 Gb)

Thermal conductivity, high Voltage resistance, Response 5 seconds, single gas environment, low power MCU chip and intelligent Sensors technology, equipped with high definition LCDTFT display, support Chinese and English Operating interface switching.

Infrared NDIR detection principle, 1% high-precision, service life of 10 years, R507 consists of R125 pentafluoroethane and R143A trifluoroethane, detection range 0-1000ppm, standard configuration two-stage alarm.

PID optical ion high-precision, conventional, high-precision MCU chip, supports a variety of signal output (4-20mA, RS485, wireless communication), built-in sound and light alarm and wireless remote alarm to enhance security.

For automobile manufacturers, it can detect formaldehyde, benzene, toluene, Xylene four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support customized wireless signal transmission, and can operate the Detector by remote control without opening the lid.