Mayer Rod

The popular rod number of RDS, the application involves dozens of sub-segments, such as silver-coated nanowires, polymer nano-films. 13.7 micron wet film thickness, this model is wire-wound steel rod, 3/8 inch main rod diameter.

Mainstream models of inks scraping samples, Mayer wire-wound principle, Wire diameter 0.13mm, about 11 micron wet-film control, suitable for the application of Wire-wound drawdown Bar inspection on inks Color tinctorial strength in the newly released GB/T13217.1 standard in 2020.

Wire-wound, wet film thickness 12μm, diameter 3mm, Total length 245mm, application width 140mm, grip width 60mm, material stainless steel. One-handed film

Wire-wound, wet film thickness 18.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.20mm.

Wire-wound, wet film thickness 12μm, diameter 9mm, Total length 375mm, application width 255mm, hand width 60mm, material stainless steel.

Formed Spreader process, wet film thickness 17μm, film accuracy 0.5μm, fine workmanship, high-quality stainless steel material, can be purchased separately handle matching use.

Can film 13.7 μ m, using winding process, Wire diameter 0.15mm, rod diameter 6.35mm, the main rod and steel wire are stainless steel.

Winding process, Wire diameter 0.13mm, rod diameter 6.35mm, the main rod and steel wire are stainless steel, can film 11.4μm.

Manual Spreader, formed process, 15μm wet film thickness, 50 + 50mm handheld space at both ends, support Spreader range with width of 300mm.

Winding process, Wire diameter 0.13mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 11.4μm.

Wire-wound, wet film thickness 12 μm, Total length 240mm, application width 200mm, hand width 20 + 20mm, material stainless steel.

The production process is formed, the wet film thickness is 20μm, the diameter is 10mm, the Total length is 400mm, the application width is 300mm, and the grip width is 50 + 50mm.

Moulding 15μm, Application width 210mm, formed process, not easy to block, easy to clean, can be purchased separately handle matching use.

Using formed molding technology, the rod diameter is 6.35mm, the film can be 13.7μm, the application width is 300mm, and it has the characteristics of continuous wire and easy cleaning.

Can film 11.4 μm, formed molding technology, rod diameter of 6.35mm, with continuous wire, easy to clean and so on.

It is suitable for preparing 18.3μm wet-film, rod diameter 6.35mm, Total length 400mm, effective Spreader width 300mm, suitable for Coating inks, Resin, Plastic, Pressure sensitive adhesive, etc.

Also known as the color rod, using winding process, Wire diameter 0.15mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 13.7μm.

The production process is formed, wet film thickness 11.4 μm, diameter 9.5mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Formed, WFT 15μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

Mini Spreader coating bar, OSP-20/60 rod length 6cm, application width 6cm, optional handle matching film, film thickness 20μm, wear-resistant stainless steel material.

Can film 16.0μm, using winding process, Wire diameter 0.18mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, hand width 50 + 50mm.

Popular RDS rod number, wet film thickness 13.7μm, production process formed, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Formed molding technology, rod diameter 6.35mm, Film thickness 16.0μm, Spreader width 300mm, with continuous wire, easy to clean and other characteristics.

Formed Spreader process, with easy to clean the advantages of continuous wire, Film thickness of 18.3 microns, Spreader width of 30cm, suitable for manual film.