Mayer Rod

The popular rod number of RDS, the application involves dozens of sub-segments, such as silver-coated nanowires, polymer nano-films. 13.7 micron wet film thickness, this model is wire-wound steel rod, 3/8 inch main rod diameter.

Mainstream models of inks scraping samples, Mayer wire-wound principle, Wire diameter 0.13mm, about 11 micron wet-film control, suitable for the application of Wire-wound drawdown Bar inspection on inks Color tinctorial strength in the newly released GB/T13217.1 standard in 2020.

Wire-wound, wet film thickness 18.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.20mm.

Wire-wound, wet film thickness 16.0μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.18mm.

Winding process, Wire diameter 0.13mm, rod diameter 6.35mm, the main rod and steel wire are stainless steel, can film 11.4μm.

Wire-wound Mayer Rods, 1/4 inch (6.35mm) in diameter, 400mm in Total length, 300mm in effective Spreader width, made of wear-resistant stainless steel.

Winding process, Wire diameter 0.13mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 11.4μm.

Using formed molding technology, the rod diameter is 6.35mm, the film can be 13.7μm, the application width is 300mm, and it has the characteristics of continuous wire and easy cleaning.

It is suitable for preparing 18.3μm wet-film, rod diameter 6.35mm, Total length 400mm, effective Spreader width 300mm, suitable for Coating inks, Resin, Plastic, Pressure sensitive adhesive, etc.

Also known as the color rod, using winding process, Wire diameter 0.15mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 13.7μm.

The production process is formed, wet film thickness 11.4 μm, diameter 9.5mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Applicator rod adopts winding process, Wire diameter 0.18mm, rod diameter 6.35mm, main rod and steel wire are stainless steel, can film 16.0μm.

Popular RDS rod number, wet film thickness 13.7μm, production process formed, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Formed molding technology, rod diameter 6.35mm, Film thickness 16.0μm, Spreader width 300mm, with continuous wire, easy to clean and other characteristics.

Formed Spreader process, with easy to clean the advantages of continuous wire, Film thickness of 18.3 microns, Spreader width of 30cm, suitable for manual film.

Wire-wound process, can prepare 18.3μm wet-film, Total length 400mm, effective Spreader width 300mm, 304 stainless steel material, hand width 50 + 50mm.

The production process is formed, the wet film thickness is 16.0μm, the diameter is 9.52mm, the Total length is 400mm, the Spreader width is 300mm, and the material is stainless steel.

The production process is formed, the wet film thickness is 18.3μm, the diameter is 9.52mm, the Total length is 400mm, the Spreader width is 300mm, and the material is stainless steel.