Mayer Rod

Can film 150 micron thickness, does not have a handle Spreader, rod diameter of 10mm, can be manually Spreader by holding the space of 50mm at both ends.

Wet film thickness 182.9μm, film width 30cm, diameter 9.52mm, can reduce clogging and eliminate scratches, suitable for high viscosity film.

Interstitial wire-wound, film thickness 194.3 μm, diameter 9.52 mm, suitable for high viscosity fluid scraping.

Wet film thickness 200μm, application width 300mm, formed process, continuous wire easy to clean, wear-resistant anti-corrosion stainless steel material, suitable for Coating, coating, glue or Miscellaneous materials need a specific thickness of the film sample.

Winding process, Wire diameter 1.52mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 137.2μm.

Winding process, Wire diameter 1.78mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 160.0μm.

The Wire diameter is 1.40mm, the rod diameter is 12.7mm, the main rod and the steel wire are stainless steel, and the film can be 125.7μm.

Winding process, Wire diameter 1.91mm, rod diameter 12.7mm, RDS 75 #main rod and steel wire are stainless steel, can film 171.5μm.

The original imported KHC film long rod set can choose 8 of 10 kinds of winding rods from 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, with a large Drawdown Plate and 500 sheets of proofing paper and a wire rod bracket.

The original imported KHC film short rod set can choose 8 of 10 kinds of winding rods from 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, with a small Drawdown Plate and 500 sheets of proofing paper and a wire rod bracket.

Formed, WFT 110μm, diameter 10mm, Total length 400mm, application width 300mm, grip width 0, material 304 stainless steel

The film thickness is 131μm, the length is 400mm, the effective application width is 300mm, the formed process is adopted, and the wire is continuous, and the cleaning is easier.

120 micron film thickness, the Total length of 400mm, without the handle, using austenitic stainless steel material, long wear and corrosion life, diameter of 10mm.

The film thickness is 120μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 100μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.

The film thickness is 150μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.