Mayer Rod

Mayer wire-wound 1.12mm steel Mayer Rods, conventional 3/8 inch diameter, prepative 100μm wet film, Spreader width 30cm, stainless steel.

Imported from the United States, can be prepared 38.9 μm Film thickness wet-film, imported stainless steel material, the main rod diameter is 9.5mm.

Experimental wire-wound Applicator rod, Film thickness of 125.7μm, 304 wear-resistant stainless steel material, Spreader width of 300mm, support custom Miscellaneous Spreader length.

Large RDS scraper, Film thickness of 160μm, steel Wire diameter 1.78mm, non-popular rod number, suitable for low viscosity thick film Spreader, both ends have 50mm hand-held part, stainless steel material.

Film thickness 148.6μm, wire-wound Spreader process, Wire diameter 1.65mm, effective Spreader width of 30cm, is a wear-resistant Mayer Rods imported from the United States.

Wire-wound process Mayer Rods, 137.2μm Moulding Film thickness, Wire diameter 1.52mm, for inks scraped film Moulding, can determine the hiding power, color and Gloss of the film and Colorimetric.

Wet film thickness 182.9μm, film width 30cm, diameter 9.52mm, can reduce clogging and eliminate scratches, suitable for high viscosity film.

Wire-wound Mayer Rods, Film thickness 171.5 μm, Spreader width 300mm, stainless steel material, Wire diameter 1.91mm, laboratory manual film can also be equipped with Automatic Film Applicator.

Wire-wound, wet film thickness 105.2μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 1.17mm.

Production process is formed, wet film thickness 100.6 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Using wire-wound process, stainless steel film scraping rod, rod diameter is 9.5mm, wire-wound Wire diameter is 1.32mm, preparatory film of 118.9μm.

Mayer Rods imported from the United States, formed process, suitable for levelling, sagging, color matching, color repair, hiding power, fingerprint resistance, etc. Film thickness is 205.7 μm, manual scraping, uniform film.

Using formed molding technology, the rod diameter is 6.35mm, which can film 100.6 μm, and has the characteristics of continuous wire and easy cleaning.

Imported from the United States, using formed molding technology, the rod diameter is 6.35mm, and the film can be 109.7μm. It has the characteristics of continuous wire and easy cleaning.

6.35Mm steel rod diameter, Spreader wet-film 182.9μm, effective Spreader width of 300mm, is a molded Spreader rod, not easy to break the wire, easy to clean.

Wire-wound Coating Applicator, Total length 40mm, Moulding Film thickness 109.7 microns, compared to domestic (CN) rod with higher film accuracy, up to 1 micron, using 304 stainless steel material.

Using formed molding technology, the rod diameter is 6.35mm, the film can be 125.7μm, the Spreader width is 300mm, and it has the characteristics of continuous wire and easy cleaning.

217.2 μm wet film thickness, Spreader width is 30cm, the material is 303 wear-resistant stainless steel, molded Spreader process, rod diameter is 6.35mm, and wire-wound process is optional.

0.1 μm high accuracy quantitative coating film, coating, film thickness control is 112.0 microns, formed process cleaning is simple and not easy to block pigment.

Can film 137.2 μm, using formed molding technology, rod diameter of 6.35mm, Spreader width of 300mm, with continuous wire, easy to clean and so on.

Big stick, Film thickness 194.3 μm, using 304 stainless steel material, the Total length is 400mm, support specification customization, suitable for scraping thicker film, formed easy to clean.

Extrusion process, 102.9μm, 1/4 inch diameter, stainless steel Applicator rod Total length 40cm, can be prepared 30cm film.

Using formed molding technology, rod diameter is 6.35mm, can film 148.6μm, hand width 50 + 50mm, material stainless steel, with continuous wire, easy to clean and other characteristics.

Extrusion type Mayer Rods, Film thickness of 107.4 μm, for film scraping of about 100 microns, Spreader rod at both ends of the hand portion of 50mm.