Brand：
Price：
$172.00
SE
Japan OSP OSP-330T L400 formed Applicator rod Coating Applicator 250μm
Formed330μm10mm400mm
The wet film thickness is 330μm, the application width is 300mm, the formed process, the continuous wire is easy to clean, and the 304 stainless steel material is used, which is suitable for the experiment of scraping thicker coatings.
$172.00
SE
Japan OSP OSP-80T L400 Applicator rod wire-wound drawdown Bar WFT 80μm length 400mm
Formed80μm10mm400mm
The film thickness is 80μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.
$172.00
SE
Japan OSP OSP-120T L400 Applicator rod wire-wound drawdown Bar WFT 120μm length 400mm
Formed120μm10mm400mm
The film thickness is 120μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.
$172.00
SE
Japan OSP-17/400 formed inks coating bar WFT 17μm length 400mm
Formed17µm10mm400mm
The thickness of the formed inks coating bar film is 17 μ m, which has the advantages of easy cleaning and continuous filament, and is not easy to block impurities. The effective application width is 30cm.
$172.00
SE
Japan OSP OSP-76/400 inks coating bar WFT 76μm length 400mm
Formed76µm10mm400mm
Formed, WFT 76μm, diameter 10mm, Total length 400mm, application width 300mm, hand width 0, material 304 stainless steel
$172.00
SE
Japan OSP OSP-180T L400 thick film Mayer Rods film thickness 180μm
Formed180μm10mm400mm
Wet film thickness 180 μm, application width 300mm, formed process, continuous wire easy to clean, wear-resistant anti-corrosion stainless steel material, suitable for Coating, Resin, paints, glue and other film sample preparation.
$172.00
SE
Japan OSP OSP-100T L400 Applicator rod wire-wound drawdown Bar WFT 100μm length 400mm
Formed100μm10mm400mm
The film thickness is 100μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.
$172.00
SE
Japan OSP OSP-150T L400 Applicator rod wire-wound drawdown Bar WFT 150μm length 400mm
Formed150μm10mm400mm
The film thickness is 150μm, the length is 400mm, and the bottom is a K-shaped cogging, which is suitable for customers with higher glue viscosity, such as silk, non-woven fabrics, etc.
$133.00
SE
CHINA 600μm Film Applicator Mayer Rods 400mm long
Formed600µm10mm400mm
600μm film thickness, 300mm application width, formed process, groove is not blocked, easy to clean, stainless steel material
$332.00
SE
UK RK KHC.11.1 + KHC.21 wire-wound drawdown Bar Drawdown Plate set 6μm
Wire-wound6μm9mm375mm
$332.00
SE
UK RK KHC.11.4 + KHC.21 coating bar Drawdown Plate set 40μm
Wire-wound40μm9mm375mm
$332.00
SE
UK RK KHC.11.3 + KHC.21 Applicator rod Drawdown Plate set 24μm
Wire-wound24μm9mm375mm
$114.00
SE
Pushen XB-II 50um experimental wire-wound drawdown Bar length 400mm
Wire-wound50μm400mm
Wire-wound, wet film thickness 50μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$114.00
SE
Pushen XB-II 80um wire rod, length 400mm
Wire-wound80μm400mm
Wire-wound, wet film thickness 80μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$332.00
SE
UK RK KHC.11.2 + KHC.21 Mayer Rods Drawdown Plate Set 12μm
Wire-wound12μm9mm375mm
$114.00
SE
Pushen XB-II 60um wire rod, length 400mm application width 300mm wire-wound
Wire-wound60μm400mm
Wire-wound, wet film thickness 60μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$110.00
SE
Pushen XB-II 25μm steel wire rod, length 400mm
Wire-wound25μm400mm
Wire-wound wire rods can be prepared with a wet film thickness of 25 microns, a Total length of 400, and an effective application width of 300mm.
$110.00
SE
Pushen XB-II 30μm inks coating bar length 400mm
Wire-wound40μm400mm
Proofing rod can be prepative 30 micron wet film thickness, Total length 400mm, application width 300mm, hand width 50 + 50mm, stainless steel material.
$110.00
SE
Pushen XB-II 20μm Proofing rod length 400mm
Wire-wound20μm400mm
Wire-wound Proofing rod can be prepared with a wet film thickness of 20 microns, the Total length of steel wire Applicator rod is 400, and the effective application width is 300mm.
$110.00
SE
Pushen XB-II 200μm wide-wound Spreader roller, length 400mm
Wire-wound200μm400mm
Wire-wound Spreader roller can be prepared with a wet film thickness of 200 microns, a Total length of 400, and an effective application width of 300mm.
$110.00
SE
Pushen XB-II 40μm Wire-wound drawdown Bar Coating Applicator length 400mm
Wire-wound40μm400mm
Wire-wound Proofing rod can be prepared 40 micron wet film thickness, the Total length is 400, the effective application width is 300mm.
$110.00
SE
Pushen XB-II 120a paints coating bar length 400mm
Wire-wound120μm400mm
Wire-wound, wet film thickness 120μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$110.00
SE
Pushen XB-II 100um inks bar, length 400mm
Wire-wound100μm400mm
Wire-wound, wet film thickness 100μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$110.00
SE
Pushen XB-II 150μm wide-wound coating bar length 400mm
Wire-wound150μm400mm
Wire-wound coating bar can be prepared 150 micron wet film thickness, the Total length is 400, the effective application width is 300mm.
$110.00
SE
Pushen XB-II 15μm stainless steel wire rod, length 400mm
Wire-wound15μm400mm
Wire-wound stainless steel wire rod can be prepared with 15 micron wet film thickness, the Total length is 400mm, and the effective application width is 300mm.
$110.00
SE
Pushen XB-II 12um stainless steel wire rod, length 400mm
Wire-wound12μm400mm
Wire-wound, wet film thickness 12 μm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material stainless steel.
$141.00
SE
CHINA Applicator rod ASP WFT 300μm application width 300mm coating bar
Formed300µm10mm400mm
300μm film thickness, 300mm application width, formed process, groove is not blocked, easy to clean, stainless steel material.
$133.00
SE
CHINA bar Spreader 450 μm formed Mayer Rod 400mm long
Formed450µm10mm400mm
450μm film thickness, 300mm application width, formed process, groove is not blocked, easy to clean, stainless steel material
$133.00
SE
ASP CHINA Experimental coating rod Mayer Rods 250μm formed wire-wound drawdown Bar
Formed250µm10mm400mm
250μm film thickness, 300mm application width, formed process, groove is not blocked, easy to clean, stainless steel material.
If you don't know how to choose "Mayer Rod", please consult customer service.