Mayer Rod

6 micron Coating thickness high-precision prepative, application width 300mm, widely used in pulp and paper, Spinning & weaving, Coating, Leather, Optical inspection film, Encasement materials and polymer materials and other precise quantitative preparatory film laminating experiments.

The production process is formed, the wet film thickness is 50μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

Provide 2 micron wet-film scraping sample, low film width requirements or good film effect on tinplate, diameter 10mm, Total length 60mm, application width 60mm

Scrape sample, optional handle effect is better, the production process is formed, wet film thickness 1.5μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Imported formed coating bar, film thickness 7μm, suitable for automotive coatings, Plastic film, printing and R & D units and other fields, the Total length of the rod is 40cm.

The production process is formed, the wet film thickness is 20μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, and the grip width is 0 + 0mm.

Hot-selling model, 3μm ultra-thin film, formed process design is not easy to break the wire and easy to clean, the effective application width is 300mm, and there are 50 + 50mm grip parts at both ends.

The production process is formed, the wet film thickness is 60μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

Formed, WFT 15μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel

The production process is formed, the wet film thickness is 100μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

The lowest film thickness under OSP, can be prepared for 1.5 micron wet-film, suitable for users who need ultra-thin film, can be hand-scraped with Film Applicator, ultra-thin wet-film is recommended to pass Film Applicator to reduce manual pressure, shake and uniform speed problems caused by deviation.

Formed, wet film thickness 30μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Wet film thickness 330 μ m, application width of 250mm, wear-resistant stainless steel material, formed Spreader process, easy to clean continuous wire, wear-resistant and anti-corrosion.

Formed, wet film thickness 8μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Mini Spreader coating bar, OSP-20/60 rod length 6cm, application width 6cm, optional handle matching film, film thickness 20μm, wear-resistant stainless steel material.

The production process is formed, the wet film thickness is 30μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.

Formed, wet film thickness 60μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Hot-selling rod number, formed production process, wet film thickness 35μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel.

Wet film thickness 300μm, application width 300mm, formed process, continuous wire easy to clean, 304 stainless steel material, suitable for high film thickness experimental Moulding requirements, such as glue, Resin, paints, etc.

Formed, wet film thickness 15μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 100μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 150μm, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.

Formed, wet film thickness 6μm, diameter 10mm, Total length 60mm, application width 60mm, material 304 stainless steel.

Formed, wet film thickness 47 μ m, diameter 10mm, Total length 60mm, application width 60mm, grip width 0, material 304 stainless steel.